开云体育

Thank you very much for your interest. I am very glad you liked it. Australian Woodrewiev I made a few attempts. But they did not take me into consideration. If you know how to contact them, please

Awesome work! -- John Hinman Boise ID Kappa 450X and A941

Hi Burak: Wow! This is amazing. Thank you so much for sharing your description and pictures. Have you considered putting this into Maker of the Year put on by Australian Wood

Herkese merhaba. Yeni bir sehpa yapt?m. Masan?n üzerine 1634 par?a siyah boyal? abanoz ve aphromosia ah?ap kaplamas?ndan olu?an marquetry tekni?iyle bir ?al??ma yapt?m. Bunun i?in Antik

I haven't done any hollow core doors, but have done other honeycomb core panels, and shop made torsion boxes. My inclination would be to press face down, with a 3/4" MDF caul on top of the door. You

Excellent idea Alex, if it is not too much trouble for Brian. I would contribute. Warm regards, Lucky Dr David Luckensmeyer Designer & Maker @luckensmeyer M: 0413 013 115 From:

I am fairly?new to the group and already deeply appreciative of the expertise provided by many members. I have been working?on converting a pole barn into a workshop and I will soon be looking

I am fairly new to the group and already deeply appreciative of the expertise provided by many members. I have been working on converting a pole barn into a workshop and I will soon be looking

Like others in our group, I find it unreasonable that Brian Lamb finds himself saddled with the financial costs associated with maintaining the FOG. The other cost, his time, and the many

I doubt there is anything you did that caused the problem. Most likely a defect in the material or like I said, to sharp of a radius in the corner. The shaft most likely was designed to go thru the

Hi Graeme, Congrats on the new machine!! I have a 2024 TF-130 and I just love it. Hmm, looking at your photos, I'm skeptical that you have an interchangeable spindle, I think your machine may have

If you don't want a 1.25" spindle, and don't think you will ever want a 1.25" spindle. I would just have the spindle you have turned down to 30mm by a machine shop. [email protected]> wrote:

You could have a machine shop make a spindle for you, and it may be less expensive than a brand name one, depending on how complicated the spindle is.? They are usually made to H7,g6 tolerance class

Anyone have any experience veneering hollow core doors? I’m running a vacuum press 20lbs at 5,000ft elevation. We have 8 doors to do, and have already run the hardwood edge banding and scribed to

Hi Brian, Is there something I should or shouldn't be doing when I use the machine in order to avoid this from happening in the future? Understand the stress that caused the failure, but not sure

The shaft broke from stress risers in the sharp corner between the smaller section and the larger section. Pretty common thing to have happen... so you just got lucky! :-) It's nice that they designed

Imran, Great! Thank you. I just gave it a try and it worked - obviously without actually making any real adjustments yet since I am still waiting for the parts. But the actual reset to 20mm works. I

The spindle won't be cheap. To get up and running, you might buy a couple of 1"-30MM bushings for the 1" spindle. You don't need many and if you keep the cutter low on the spindle, you will be fine

I don’t know if this will help but I bought a 30 mm spindle from SCM 2002. I would just contact Parts at SCM. You’ll also need a tube to handle to change the spindle

Cornelius, The method to reset your planer DRO should be in the manual. I have shared this and so far no one has mentioned that it does not work, i.e., Felder uses same method across it machines. Not