开云体育

https://www.felder-group.com/en-us/shop/quick-couplings-sc125884/reduction-with-quick-connector-sp125891 Or ask fellow FOG member Bill Belanger to print you one. He has a shop on Etsy:

Yahoo, free parts. Do you have any recommendations on a reducer from 140mm to 120mm so I can put on the aigner bowmoulder? 3D printer part would be the best. Also a place to buy a 80mm hose. I bought

I could be wrong, but I believe those parts are related to the tenoning hood assembly. Actually, they look like they are for the Hammer tenoning plate/hood

One more question. with the tenoning plate I got the following hardware. From what I see it isn’t needed. Am I right?

I had used the same machine for many years. It’s a good machine for its class. The “owners manual” is simply an exploded parts list diagram. No words whatsoever on how the machine functions.

PK, I have no idea what he thinks. I told him I am talking about the swing away on the Profil. He told me he will send me some pictures in the morning but he didn’t. How did you install the swing

Netanel, I almost spit out my drink at your last sentence.? Does he think you have a combo machine? So the power feed mount has no piston to support it on a profil 45z x-motion.? On the KF700 with a

Thanks, Cornelius! The tech was here earlier and removed the MDF strip. I had no idea it was there. He has much of the assembly done, and will be back tomorrow to finish. He was looking for a forklift

PK: Thank you for clarifying that. I found that part rolling around on the floor of the pallet when I received my F900z. No one seemed to know what it was for, so it's been in a drawer for the last 3

Hi Jeff, I endorse your plan to go with an "M" machine (solid cast iron table), as opposed to a "Z" (sliding table). The solid cast iron table will give you more options in terms of jigs/accessories,

Thanks everyone. PK, I attached the knob like you have on your machine, what is wired is why two of us have this part, but Larry doesn't. I got a permission from Felder to open to electrical box to

Given your stated requirements, I would encourage you to look closely at the Profil 45M - not the X-motion version. This way you get a much more robust shaper hood that can be tilted back and away,

Hi all, As I'm not getting any younger I need to sell some machines that aren't getting much use and taking up space. I bought this machine, the Houfek HB900 from Adwood at the IWF around 2006. It's

What to buy? I am looking to upgrade my secondary shaper to compliment the awesomeness of my 3 year old F900z. I find the slider on the existing machine is wonderful for end work, but I want the full

Hi John, Here are photos I had taken of the leaflet that was taped to my sliding table, showing the two MDF strips that were preventing the cage from moving freely. Again, these were un addition to

Thanks for the links to checklists, David. Imran, I do not recall noise or clicks. The slider was hard to move. -- John Hinman Boise ID Kappa 450X and A941

Not entirely sure, but the first photo my guess is outfeed table height adjustment. Second photo is lock knobs for both infeed and outfeed tables. Regards, Bryce --

Hi, in addition to the plastic stoppers, my machine had additional MDF strips wedged in between track and slider that prevented the table from sliding easily. Those strips were at least 1 meter long.

John, You don’t have to do it but as David said the bearing is not centered as you stated the slider will not clear the blade opening. This is normal. It is a nerve wrecking experience to slam the

Hey guys, I just bought a 2004 Hammer A3 41 and wonder what the function of these knobs is? Does anyone know? Does anyone happen to have a manual for this old machine? It differs from the new models