开云体育

Alex, I documented the weight difference between weights of standard stand (SG13) and SS in this post. Differences is 47 lbs. Re: Comatic DC40 power feeder stand arm length groups.io Imran Malik

Tom, Patrick, Imran and Andy, Thanks for the prompt reply. I reached out to Kyle at Shop Gear to see if he had a solution. No luck there. Tom's solution will certainly work. I just can't bring myself

The BGHM books are the best safety manuals. A lot better than the British HSE. They give the books out free at Fenester Bau. I did not see their booth this year. If you are interested in shaper,

I have the dc40 with the regular stand and a gas strut assist. The gas strut really only helps you on the lower half of the swing/arc. Once you reach a certain point, it is all on you. It isnt like im

Hi Andy, No worries, yeah the weight of the Smart Stand is such that, even with the gas strut, it feels like you're lifting the full weight of the stand, I can't imagine trying it without the gas

Hi Laurie, Not sure if you are interested in trouble shooting. It is hard to guide people remotely and many times requires 2 people. So I suggest you replace K1. From schematic it appears that your

Perhaps I should have looked again at the pictures to answer my own question. Duh. Disregard that email. The modifications look easy enough. [email protected]> wrote:

Hey Tom I’m looking at this setup right now. You mention the assembly is heavy, do you have the gas shock option installed? [email protected]> wrote:

Hi Alex, I did some hunting and was able to track down some photos of the modifications I made to the Smart Stand to fit on the Felder tilt bracket. Reviewing the photos, it looks like in addition to

Hi Alex, I did modify a DS400 to fit on the Felder tilt bracket for my KF700SP. I don't think I have any photos, but I took an angle grinder to the base and removed some material from the one side

Laurie - As other posts here have mentioned, Google translate or a decent German-English dictionary is a good part of the Felder/Hammer tool kit. Good luck with this, Imran is pretty savvy about the

This is the schematic in the user manual. [email protected]> wrote:

On this page there is the original document in German: https://www.bghm.de/fileadmin/user_upload/Seminare/Holzbranche/TSM-Web_BG_96.18.pdf

Laurie, Thanks for confirming. This is an interesting anomaly. German is fine but need schematic to offer any assistance. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

When the stop button is pressed, the speed slows slightly but then returns to the normal operating speed for 5 to 10 seconds and then the motor reduces speed and stops. If I press and hold the red

Hi Imran, Thanks for the reply. I did reach out to Kyle at Shop Gear to see if perhaps they had an alternative base for the smart stand. I didn't see anything on the website, but one never knows. I

Hi Alex, I was on quest of figuring this out but no one here, that I recall has confirmed. I thought Kyle (Shopgear) mentioned that someone did. Have you asked him? Locking levers are large so easy to

I got tired of fighting the Felder F48 power feeder. ?Very heavy and awkward to switch from horizontal to vertical feeding. ?So I purchased a Comatic DC70 with the smart stand. ?In error, I assumed

Thank you David, I just uploaded the full translated document, I haven't had a chance to review, but looks like good info on shapers, sliding table saws, band saws, etc... -- Tom Gensmer Heritage Home

Thank you!!!