Laurie,

Thanks for confirming. This is an interesting anomaly. German is fine but need schematic to offer any assistance.?

Imran Malik

On Oct 29, 2024, at 11:46?PM, Laurie Lewis via <laurielewisofcalgary=[email protected]> wrote:

?

When the stop button is pressed, the speed slows slightly but then returns to the normal operating speed for 5 to 10 seconds and then the motor reduces speed and stops.? If I press and hold the red button continuously, it makes no difference.? It actually seems to extend the time before the machine stops.? I have the original user manual and there is some type of schematic in the back of the manual but all of the writing is in german.?

On Tue, Oct 29, 2024 at 4:16?PM imranindiana via <imranindiana=[email protected]> wrote:

Can you confirm that it increases in speed or just does not continue to slow down. Thought being, that the brake is kicking out after a short time.? If it is indeed increasing in speed then I need to look at the schematic.?If you have one you can share high resolution pics. Make sure you are able to read lettering etc when you zoom in.

One thing you can try is to keep the red button pressed continuously to see if it makes any difference.

Imran Malik

On Oct 29, 2024, at 5:22?PM, Laurie Lewis via <laurielewisofcalgary=[email protected]> wrote:

?

Recently my CF531 has exhibited a delay in stopping.? When I press the stop button, the machine begins to slow down but then increases in speed and I have to wait 5 to 10 seconds before the machine stops completely.? This is the case for all of the combination machine functions.? Does anyone know why this is happening and how I might correct the problem.??

Thanks, Laurie Lewis