开云体育

Hi Neil, Do you have any pictures you could share showing the various fittings used with the Pex system? Thx, Wade

I recall reading somewhere that standard pex doesn’t have a high enough pressure rating compared with Pex-al which is what max line is made out of. [email protected]> wrote:

My two cents, I have to second using PEX - I use 3/4, I have around 60’ with 5 drops - key for me was buying the Ryobi crimper for the Stainless rings - use it for all my plumbing/ hydronic heating

I ended up getting the maxline kit by rapid air (1/2”ID and did 4 drops) Now that I am about to test the system I see that my air compressor is broken is leaking (the gauge was also broken from

I mentioned this item for sale several months ago. But now, I have pictures and all the accessories gathered up. Please PM me for details on the machine.

Thanks Rod. I am still leaning towards Forrest dado to speed up the process. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

Murray, Thanks for the progress report!? Well done! J.

Many thanks for all the replies. Joe, that is a very impressive and very professional looking piece of work work. What material have you used for the "plates"? A question was asked about the

Hi Imran, if it’s big enough I bandsaw the majority and clean up with a chisel. If it’s narrow I do all slots with the 2 blades and then go to one rip blade to make successive passes The tenon

This picture of a 68mm thick euro window section with Accoya cladding illustrates the solid 3 layer construction. I use this method for doors 56, 68 and 78mm thick. No glue lines to the

Hi Joe, You mention 3 layer lamination method but also say there is no glue lines to the weather. My door fits this except the outside of the stiles and top/bottom rails. How do you avoid these glue

Dennis, Thanks for the details. It is a good discussion. I am not sure I am sold yet. Your door sound beautiful, if you are able to please share pics. Imran

Imran, I don't know for sure how the LSL was stored.? However, it was probably in an unconditioned building, or outside with a cover on it.? I believe it was in the summer months, and rain in the

In general, I agree with Joe and Mac. However there are circumstances (exterior marine environments for instance) where a fabricated stave material is a good alternative. You might want to check

I agree with Mac and use solid whenever I can get the right material. I only use stave core when working with unstable or extremely knotty material. Doors have been built solid for many centuries. We

Thanks for kind comment!! Sorry to distract you. Best mac,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

Seems like a good price too. A current Kappa 450 X-motion, with PCS, 7.5 HP, lacking clamps and the other extras, is US$45,000. -- John Hinman Boise ID K700S and A941

Hi PK’s prospective buyers: I have the same year Kappa 400 X-motion and I can strongly recommend it. In 8 years of serious use, it has never broken down, nor had an issue of any kind that I can

Are I selling your egl?

Adding pics of accessories. Felder EGL: Felder Outrigger Cart: Original Felder manuals: