开云体育

Did you read my previous post - I linked to it in my first reply. They come up on eBay about every 2 years. You could also consider this. I have one of these too. Make me an

Not on their website- ?seems like it is NLA

That’s easy. Bridge City Tool Angle Master Pro. It’s the tool I have and use for this kind of thing. Watch this - skip to 1:00 in the timeline. https://youtu.be/_ZpkqpRvI-s? AngleMaster

You have the Mitutoyo protractor which are super accurate (but the once who will give you 0.01deg resolution costs over $1000) Before getting such an expensive protector I would probably use the less

My first project with the SCM combo unit will be the making of a wooden soccer ball which is made up of hexagons and pentagons with very precise mitre cuts for the joints. The guy whose U-Tube video I

Brian, Thanks for the update. It looks really impressive machine. Imran, there is an extension table SCM sales for the planer, though the user needs to drill it. From the spec of the

So between this group and some great threads on Sawmill Creek finally got my A341 dialed in. I really feel like I’ve gotten to know the machine absolutely inside and out. But after all this fiddling

Very nice. Felder better get their act together and ship machines that work straight out of the box. I do not recall making any adjustments to my 2002 KF700. So not sure if we hear the bad news here

Hi Imran, The finish is as good if not better than any I’ve seen. Once I got the Cosmoline off I used a green scuff pad and a random orbital with WD40 on all three tables. That really did the

Thanks for the update Brian. I see that fence is secured, for lack of better word, in a traditional manner. This means you should be able to attach extension table to the jointer infeed I see couple

Netanel, So all set up and I’ve been running some stock through my SCM FS41ES. It is lovely! Everything works as it should and no evidence of any snipe in either jointing or planing, and a great

Pierre, Sorry to hear of your issue. The only thing I can think of is to rotate the cutter head (complete power off on machine) and hear for any such noise. Imran

I have been using my CF741 since last November and used the planer/jointer extensively. Earlier this week while jointing a piece of Hemlock, it started to make a high pitched grinding noise. When I

Thanks for that Tom, but I took a deposit last week and it’s sold! D

Thanks Tom, very informative group, thanks for the two references and your note. Will give it a bit of extra tension and see how it goes. On the tensioning side, what is the guidance on releasing

Hi Ron, the Whitehill set Andy refers to above includes the "bevel front" profile as standard and all of the options let you do long, traditional tenons too which is nice for higher end work.

Pictures of the through tenoned doors.

I recently built some simple square edge cabinet doors for my guest apartment. Using adjustable groovers for through tenons and the 6mm panel groove. Mesquite 12mm panels and ash frames. Mesquite was

Ron, I have the Italian version of that Garniga set that allows for thicker doors. I think the US version goes down to 19mm thick typical for US construction. I have additional grovers for my set that

I have a new Hammer 16” jointer planer that I received last year. ?I never hooked it up yet and have other plans for the space now. ?Let me know if you want pictures. ?Located in NE