开云体育

Manufactured in 2012, single phase. On Zambus casters. Located in Omaha area. $4,900.00. - - - Sold.

For people who has Tersa knifes, What type of knifes do you usually keep in stock and where do you source them? I can see different sites recommend different type of knifes for the same type of wood

As others have said, machining aluminium with wood working tools is fairly successful. The only thing I'd add is that the chips go everywhere and it's noisy, so eye and ear protection are essential. A

Michael Fortune cuts aluminum on a table saw. The key is lubricating the blade by touching the running blade with a block of paraffin.

Hey Steve, My name is Cameron, if that machine does not work out for you, I am selling my BF6-31 in pretty good shape, give me a call or text at 4403900814 if interested, I am in Ohio

If all you need to do is make the machined edges soft to the touch, a hand-held deburring tool is quick, effective, and the traditional way to do it. ?No electricity involved. The chamfering of the

The hole chamfering should not be an issue at all.? I have done aluminum round overs with a router before I had the right machine tools.? The biggest issue is that it creates a mess -- if I had to

Brett, thanks for telling me. ?I missed it but just replied.

Hello Everyone, I am selling my Felder BF6-31 Combination Machine. it is from 1994, but is still in decent shape. if you are interest, call or text at 440-390-0814, I will also send pictures.? Comes

Thanks Imran for your feedback. Yes it is single phase. I am thinking the J/P start up may be a little sluggish. And yes there are 2 capacitors common to the 3 motors. In the first instance I think I

Thanks Rod, I will open up the switch box and get some contact cleaner in there as a first attempt. However I don’t have the problem when the switch is turned to the planer function but I am

Hi Philip, it sounds like the start contact in the start push button isn’t working on occasion. There are two momentary contacts in the push button, one for the run contactor, one for the start

Hi, I use a 40mm radius bullnose knife on builds such as counter edges. Regards, Rod.

Hello All I am ordering a Whitehill rebate combi head for my shaper. Since shipping is pretty expensive, I figured to add one or two profile knives that I would be likely to use. For example, I have

I just finished up a custom pocket door for a customer and now he wants 4 more doors (2 fixed, 2 sliding) to make a large room divider. ? The door turned out great but it took way too long to

I’ve had this problem with my C3-31. These guys (especially Imran) got me up and running again. Before ordering new capacitors, I’d try pulling that module out of the front of the saw and spray a

Assuming single phase, could be the start capacitor but it does not make sense unless there are separate capacitors for saw and J/P. Felder uses one set of start and run capacitors so I would assume

Hi Everyone I have a C3-31 and in recent times when I push the start button the saw blade won't turn. I generally grab my push stick or a scrap piece of wood and give the blade a flick and away

Matthew - I sent a private message yesterday, might have hit your spam. Thx! Brett. [email protected]> wrote:

I’ll post some pics when I get home. ?I am trying to sell all at once but if I get a contract on my house I will part out.