Thanks Imran for your feedback.
Yes it is single phase.
I am thinking the J/P start up may be a little sluggish.
And yes there are 2 capacitors common to the 3 motors.
In the first instance I think I will clean around the switch box and contactors and check connections and go from there.?
toggle quoted message
Show quoted text
On 4 Jun 2024, at 9:58?AM, Philip Krisanski <philip@...> wrote:
?
Thanks Rod, I will open up the switch box and get some contact cleaner in there as a first attempt.
However I don¡¯t have the problem when the switch is turned to the planer function but I am thinking the start up of the planer may be a little sluggish. So might be the start capacitor if the saw has a greater draw than the planer as Imran was suggesting.
Cleaning is the easy first option and I will go from there.
Thanks for your feedback.
Regards Phil?
On 4 Jun 2024, at 8:39?AM, rodsheridan <riderofgallifrey@...> wrote:
?Hi Philip, it sounds like the start contact in the start push button isn¡¯t working on occasion.
There are two momentary contacts in the push button, one for the run contactor, one for the start contactor.
A bit of contact cleaner with power off may help, as will making sure you press the button completely and squarely?
Regards, Rod
