开云体育

Another option for sheet goods and doors are panel carts such as Shop Carts. https://shopcartsusa.com/Product-PanelHandler.php Tim House [email protected]> wrote:

A jib crane and a shop made Vacum plate is inexpensive if located strategically. Mac,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell

I am looking to add a shaper to my shop. This is my first shaper and I am not sure what is crucial and what is nice to have? I am currently thinking to get the F900Z with the following configuration:

There is a second, smaller belt on a lower pulley, behind the larger pulley. The black debris that is cast off onto the chassis wall appears to be in line with the smaller pulley and belt. I would

Thanks Mac - appreciate the response

Looks to me like the belt is too long, too loose and you are at the limits of adjusting the motor further away. I would remove the belt, or read what size it is and get the next smallest one and

More than likely, sheeve misalignment, take a straight edge and put it from one sheeve to the other and see if they lineup. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi

Sorry, just trying to help martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/

I saw the Biesse Winstore installed in a big commercial millwork shop. It was truly impressive. With all the bar coding of parts and panels it looked like an operator was barely needed in there. I

Thanks, yes - per my original message you'll see I had already figured that out

I glad you told me this. I thought maybe they were machine washable. I'll go for generic once use bags.

Thank you so much!!!

Hello guys, I'm new here and very much happy to read the useful discussions. Last year I purchased the AD741 and generally speaking I'm very happy with the performance and accuracy. Thus, since day 1

I have the same vintage machine… here is a page from the manual. You can adjust the height and such of the planer bed by loosening the #27 bolts and rotating the lead screw nuts, #25 to raise or

Anyone with experience taking apart/adjusting the thickness planer table?

HA! Even Felder sells one… https://youtu.be/3W38bOJIS84? Format4? v-motion - Vakuumhebesystem | Felder Group youtu.be Brian Lamb blamb11@... www.lambtoolworks.com

Search “vacuum panel lifters”, here are a few results of similar systems. You can find used ones as well, have seen some locally go for about $1000.

I just ordered these and am on the first one in the pack, seem to work pretty well. https://www.amazon.com/gp/product/B01N5RF1SO/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1

Thanks everyone Elwin

I love the ingenuity in that system, it makes me wonder how it compares to the vacuum gantry systems I've seen, definitely more flexibility. The SCM Flexstore caught my eye, then made my eyes water.