开云体育

Adding to the sentiment that Bryan Freese at 360 Machinery is a great resource and very helpful. I tried to buy some things that fell through but he was a great facilitator and has earned future

Here's four honest designs of bandsaws, which are fully adjustable Multico B600, and the Centauro CO 600, produced sometime during the 80's to 1996 Sagittario SC 800 Meber SR600, seems they may have

Hi Netanel, 1.) The ES with the X designation connotes the segmented knives. 2.) I am comfortable with the Pork Chop and don’t really see an advantage to the euro guard even after having one on my

IMO, the SCM J/P combo units are a far better choice than the equivalent Felder machines. Several here on FOG have taken my suggestion and gotten the SCM machines and been happy. You should check in

Hi, looking for feedback on widebelt sanders by Felder or other brands. I am considering 37/42" size SCM, Timesavers and Felder brands.? Last machine I need for the shop for face frames, doors and

Glad to hear we got to the same conclusion. Few questions if that is ok 1)Which type of knifes did you go with? 2)Are you intend to keep using the pork chop? (I asked the representative and the

I have one that is supposed to be here this month! I came to the same conclusion that you did. Mine (will be)is an FS 41 ESX. Kind regards, Brian D. Milidrag Cell 248.7

Does anyone here has experience with the SCM J/P combo. I did some research on the SCM vs Felder J/P and it looks to me like the SCM has some advantage as of: 1)It has parallelogram jointer 2)The

It would be fun to see someone try align their wheels the easy way, should it be possible to do so without removing the table, and using a length of clear plexiglass laid down and clamped. With a

Hi all, have been having some issues with resawing some Olive, using a 1” resaw blade from Laguna. I have is new from factory last year and fitted with ceramic blades, but I am still getting some

PK, very tempting! I might be able to afford the base model but I really want the feeder option and that along is another $$$$$.... is Kundig worth the money compare to other edge sander?

Thanks Lucky! very useful information! Albert

Come on Albert, Join the Kundig club! PK

Hi Albert (I assume)? I have a 1990s FS900KF. It is a great machine with minor caveats below. I don’t know about the new machines except that they are pricey here in Australia ($20K + AUD). My

Just wondering if anyone here had any experience with Felder's FS900KF? I know its a rebadged ACM OBS150. Cant afford or justify a Kundig for my one man show. I recently bought a well used 40yo

The scribing beam will tell you that, as it'll either draw one straight line, or it won't. I couldn't say what tolerance a 4400 sized wheel needs to be, or in-fact if a Formula wheel of the same

Tom we did think of checking the outside rims - we used a dial guage and on the whole they were pretty good - top wheel edge maximum deflection 0.2mm and 0.1mm on bottom. Is this really enough to

Thanks for all the replies again. Tom i'll have a good look at your detailed instructions on Monday - appreciated. Yes it's a new blade and yes I am aware of the adjustment on the top wheel.

Did you put a new blade on it before mucking around with moving wheels? Tom is the world expert on bandsaws, he will sort it out for you.

Yes this is the one. Your comment is well noted. Narex is a reseller here in Dubai. Thanks Colum