开云体育

Thanks All, the ones noted by Craig look correct. I'll see if I can add some to an accessory order at that price. -Karl

Karl, You should check your machine print or call Felder for actual PN for your machine. Here is a machine using 2 diff types, #4 and #27: Imran Malik

Hi Netanel, I went through a similar exercise and wound up with a RL-160. One of the primary drivers for myself was headroom. My shop has 9' ceilings, and most of the cyclones would have been a tight

I just had to order a few of these for a K700 S. ?The gray “buttons” (#213NCA) are $1.22 each and the associated screws (#400HB) are $0.50 each…plus shipping of course! -- Craig Z.

Joe, for what it is worth I have an Oneida V3000 with the HEPA filter. It clogs up also. It got a lot worse when I bought a drum sander. -- John Hinman Boise ID K700S and A941

Brandon - the euro certification is one of the reasons I consider the RL. I trust the euro regulation way more than the HEPA filter. I recently got a Dylon meter and was shocked how much super fine

A friend and fellow FOG member is considering a move from an RL to an Oneida 5hp VFD collector. He has trouble with fine dust clogging the filters with his wide belt sander.

I had the exact same question several years ago. I finally went with a demo model RL160. It takes up three times the space of the Oneida, but for me the deciding factor was that it's certified by the

I also leave mine unbolted. There's enough friction when it goes home that I don't worry about it moving on its own. A ball-detent or spring loaded pin and brass bushing would give you the postive

I just sold my old dust collector (Oneida 5HP supercell) for a preparation for my new slider (the supercell only support 1 - 5” port) and about to order a new unit (Oneida dust gorilla pro 5HP with

Post some photos please. David Best - via mobile phone

I was going to ask before I started down the 3D Printing route if anyone knew of the price/part number and availability of the small grey "Buttons" that Felder uses on their felder branded machines to

I’m in the same camp as mark. Simple and easy enough to leave unbolted.

I have not tried leaving it unconnected. It would work as dust collection, but I wondered how susceptible it would be to bumps and vibration. I’ve also been looking at switchable magnets, like

Strong ? martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/ Designing and

I leave mine unbolted

Steven, I would purchse set today if they were available. Were you able to get CAD file to have these Fabbed by FIXtiv? Thanks Scott G (I am still shocked that some of the Felder sliders T-slot is so

James I sent you a DM on this. Let me know if you didn’t get it. David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/ https://www.youtube.com/@David_Best

Thank you David. With the help from your “Survival Guide” the K700S is setup and working great! Now just need to transition from cabinet saw techniques to slider techniques. Regards, Darrell

That's the one, yes.