开云体育

I'd like to buy a 28 tooth 300 mm od 30mm bore std kerf quality rip blade for my slider that is not made in china from a company that will send it to me if I give them my credit card over the phone.

I just used scrap wood to level the AD741, I will never move it in the garage. James

Hi Bill, I’m only simply going off of what the manual is indicating to do. But good question, maybe to preserve the performance of adjustability over time. I’m not really sure why they want it

Thank You David Best, So you’ve indicated there are no threaded holes, like there is on my K700S, so I’d have to pick up additional nuts and washers as you indicated on your Flickr pages. I’m

Wade, can you explain to me why a jointer planer needs to be level? I’m not getting it. I have an AD941, never bothered to level it and no issues. In fact I know it’s not level, my floor slants.

I simply put a tapered shim under one corner of mine to keep it from rocking. -- John Hinman Boise ID K700S and A941

This is what I have on all my Felder equipment: https://www.flickr.com/photos/davidpbest/albums/72157718814798961/ I would recommend the same but without the rubber pad if your floor has any slope,

? FOG, Has anyone, with an AD941, installed a set of leveling feet? Could you let me know what feet you used for this application. Felder has told me the machine can accept leveling feet, but they

Thank You Brian, I’ll ask about leveling feet, only because I do have some slop on my shop slab. Wade

Mike, I assume you know you can make several drawings from a single model as independent projects. That does quickly eat into the limit of “10 active projects” but it is one way to get around the

I don’t have a parts list for that machine, but suspect your pin might be more of an “anti-rock” pin than leveling. Three points make a plane, so you set the unit down and then drop the

"Who wouldn’t want a spring joint every time?" Joe

“ We can have it delivered tomorrow “. Mark Foster

Also, I wouldn’t have been successful in getting the chest design completed without the assistance of David Best. Many thanks to him. On the Fusion topic, the big issue for me in the free version is

I got this in the email stream this morning and couldn’t help myself. Caption this contest. Here’s my entry. “Tell me again why this jointed surface ends up concave?” ? David Best

Brett, I went all the way to parts/joints. It was definitely a learning exercise but significantly improved my ability to design in Fusion.

Brett, I have to say that I’m impressed by your Fusion 360 designs. Features like the fluting and feet on the legs of that pedestal are clear evidence of some CAD mastery. Indeed, Fusion is one

David, My question has been answered and the answer is Yes! That message could have been more generic. Joe

Hi Mac, ??? Can you provide some details on having the drill start automatically when the handle is activated?? What did you use?? A microswitch and a relay?? An aftermarket product?

Mike King - Fantastic work! It looks wonderful and I love the lines. Did you use Fusion primarily to get to model/form, or did you break the whole thing down into joints/parts? I'd be interested to