Thank You David Best,
So you¡¯ve indicated there are no threaded holes, like there is on my K700S, so I¡¯d have to pick up additional nuts and washers as you indicated on your Flickr pages. ?I¡¯m still getting familiar with the machines layout, I¡¯d have to see if I have access to all four corners of the AD941 to be able to thread down these additional nuts to secure the leveling feet. ?
Wade
toggle quoted message
Show quoted text
On Jun 27, 2023, at 12:30 PM, David P. Best <dbestworkshop@...> wrote:
?
This is what I have on all my Felder equipment:
I would recommend the same but without the rubber pad if your floor has any slope, specifically these:
https://www.mcmaster.com/6111K51
David Best - via mobile phone?
On Jun 27, 2023, at 12:22 PM, Wade Dees <wjdsignature@...> wrote:
?
?
FOG,
Has anyone, with an AD941, installed a set of leveling feet? ?Could you let me know what feet you used for this application.
Felder has told me the machine can accept leveling feet, but they only include them when you purchase a mobility kit.
Thx,
Wade
On Jun 27, 2023, at 11:22 AM, Brian Lamb <blamb11@...> wrote:
?
I don¡¯t have a parts list for that machine, but suspect your pin might be more of an ¡°anti-rock¡± pin than leveling. Three points make a plane, so you set the unit down and then drop the adjustable pin so it doesn¡¯t teeter-totter. If you really want ¡°level¡± to the world, you will most likely have to add leveling feet or use shims.
Brian Lamb
blamb11@...
www.lambtoolworks.com
On Jun 27, 2023, at 8:41 AM, Wade Dees <wjdsignature@...> wrote:
Hello F.O.G.,
We all know how bad the directions in Felder manuals can be. ?I¡¯m wanting to level my new AD941, but a bit confused on what they are trying to show in the manual regarding the leveling of the machine. ?They say to use a spirit level to get the machine level. ?But they are also showing, in a diagram, a ¡°leveling pin¡±.
Does this machine have leveling feet all around it? ?I lifted the machine up off the floor with my pallet jack and found the one leveling pin, but does the rest of the machine need a set of leveling feet installed on it? ?
Thank You group for any insight you can add,
Wade
