开云体育

I'm in the process of ordering new start and run caps. Yes pulley is in correct position. Yes hold in the green button untill up to speed.....it blows the 24v fuse before it gets up to speed. This

Posted this solution a couple years back under 3D printing and x-roll. Search for that and the string should show up along with the files in the download section. My design captured the clamps fully

I guess I’d like to hear it with the main saw blade removed so it’s not making noise, and with dust extraction or other noises eliminated. David Best DBestWorkshop@...

The machine is a single-phase machine.? The scoring blade is rotating fine and cuts just fine.? Should I be contacting Felder tech support at this point? -Aaron

Something is clearly wrong here - the scoring saw should not make a noise like that. I hazard a guess or two - total SWAG: The scoring saw blade or saw arbor is not installed properly and is causing

Okay, figured out how to get my videos up on Youtube so that emails aren't rejected due to file size.? I just mounted my scoring blade today for the first time.? When I turn on the scoring blade, it

David, I’ve used the clamps with a 5 mm X 30 mm X 4 inch piece of hard maple in the slot on top of the clamp leg. Your design would add substantial strength and stability. Thanks for the design

If either of the following Festool clamps are what you’re referring to, then they DO NOT secure into the T-slot in the Felder sliding tables without an adapter. ? I’ve modeled up the type of

Is there a discount for fans of the (original, not the sucky US version) tv series “Rake” that helps with shipping, or is this discouraged or frowned upon among our more sophisticated on the other

Derek: Now you’re cooking with gas! I’d forgotten about your taper jig. Nice! Warm regards, Lucky ________________________________ Sent: Sunday, March 5, 2023 11:28:09 AM To:

Brian, actually simple enough. The stop on the Incra fence slides along the face … All one has to do is run it to the near end. That will provide a very secure nook for the end of the board to be

Milescraft has a t-slot base that basically just bolts on to a Kreg 3" or 6" bench clamp.? The kit has a 30mm x 35mm t-bolt that fits into the X-Roll sliding table just fine.? I'm using these for

Thank you Jacques Please note all that I am not meaning to be divisive in my remarks. I was calling for unity by way of a supportive attitude. Incidentally, if you think my concept is flawed or crap,

Derek, that’s great that you have something that works for you. How do you do tapers and angles with that wide jig on the end? My reply was only in regards to shipping costs adding 50% to the price,

To say the least, I am somewhat surprised by the views expressed by some contributors in this thread. Members of FOG, in my mind, are knowledgeable people, willing to help others and interested in

If you are talking about the green festool thumb clamps they fit but barely. I feel like any clamping pressure would pop them up. I ordered some clamps from Mac, but in the meantime I just used a cnc

I’m not sure you need an adapter, I think the Festool clamp will fit in the sliders t-slot. Worst case you could 3D print a sleeve to take up any slop. Brian Lamb blamb11@...

There’s an adapter for using a Festool clamp on a slider? Does anybody have this adapter? Thx, Wade

Hi Derek: I thought I expressed that sentiment? Apologies if I wasn’t clear enough. I like your fixture a lot, particularly as we both do a lot of solid wood projects and use hand tools. I’m

I’m so very pleased for you Lourens. Your KF700 costs about four times my K3. Clearly, you have more discretional spending available than I, or your priorities are different. I don’t understand