开云体育

I don't think you could replace the motor with other than OEM.? This isn't a standard form factor generic motor, it's an OEM thing with specialized housing, integrated right angle reduction gearing,

Hi Hope all is well Its great be part of such an informative group .. I have a problem with a used kappa 4 format 450 panel saw I purchased The machine was running previously and now all of a sudden

A step-up / step-down transformer should solve your dilemma I think. Here’s an example: https://www.grainger.com/product/DAYTON-Step-Up-Step-Down-Voltage-16V986?opr=APPD&analytics=altItems_30C515

Tom love My Erica,mine is 240 though. And over 30 years old. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@...

This looks very similar to my KF700 from 2002. I have the 1200mm slider which doesn't even have an outrigger. Original owner paid $8,500 for the KF700 and an AF-22 dust collector so Imran is pretty

Imran, Immediately upon power up my display shows "U 2.1" for about 2 seconds. Then it will display either inches or mm. If I want to change the units, I have to power off and then hold the reset

My guess is that this new cost $8K give or take a few. Imran

That’s not an eight or nine foot stroke machine, that’s the 2 meter slider, so about 78”. That changes things quite a bit, still a great machine for solid wood processing, but not so great if

If you can get the machine in 240V three phase, then a VFD in a small enclosure that takes 120V input and outputs 240V three phase is pretty easy to configure. I don’t know what the HP of these

We went to the show and were both fairly disappointed. The huge machinery booths were still there, but most of the smaller people were absent, or had a minimal booth presence, less machines and not

If you love your current saw, just find a good source for the replacement motor when you need it. And maybe take your current saw to a motor shop to see if they can do repairs if it needs in the

Will be able to go play with the machine this weekend. Don’t know all the accessories but will dig around. Thank you all for the help. Any things further in particular I should look for feel free to

Greetings! I had considered posting this in the Mafell forum, but I suspect there's a little more electrical aptitude here. I've been using a Mafell ERIKA 70 for several years now for my on-site work,

Congratulations! I'm sure you're going to love those!? As for the scoring blade, it definitely could be "hiding" somewhere. I found several smaller items bolted down to the pallet underneath the

Keith, I should have mentioned that my KF is a 2002 and I bought it new. Xroll slider is desirable and a machine with Xroll will command a higher price but the older slider with 2 slots has it’s

First, i dont think you will look back once you get the slider and use it for an hour, Keith. It is a better designed saw in just about every way with two minor/major drawbacks. One, the physical and

Was set on going to the show this year - but the potential issue(s) of choosing/discussing the IWFS in Vegas vs. Vacation (with a potential layover in Vegas...for the show ;)) with the spousal unit

I have a better feel for the old iron market than Felder but I'd pay in the 4-5K range for a very good condition KF7 series with some tooling but not much more for the first version of the 700 series.

Well said, Lucky. Thanks to the people like David Best who freely share and put in all the work of a terrific video production to help where help has not previously existed. We're all better because