开云体育

Hi Ameer, My machine displays following upon power up, prior to displaying the table position. This happens irrespective of reset button status. I recommend contacting Felder to find out what your

Dave, It is an FB450 I believe it is DC injection Braking; the machine is in storage and i will have to dig it out to check. I've converted machines before but never one with braking, ordinarily I

Imran, Sometimes I turn the AD741 power switch to OFF before shutting down the RPC, and sometimes I forget and the power switch is in the ON position when i power down the RPC. When I power the AD741

I have a 2001 machine… is your slider 8 foot or 9 foot? You can’t really cut 8’ sheets on an 8’ machine without having the blade at full height and a 12” blade. I have some troubles with the

looking into purchasing a ?KF 700 pro, 2002 model from the friend and trying to determine value of it. It has the 8 foot sliding table and numerous attachments. It is in excellent shape and has been

??????If it mounts to a 30mm OD bar (I guess I can re-bore to 30mm if it is less than that) I will be happy to pay for shipping. I can use it on my FD250 for light work. I got rid of

I'm gonna *cough* here and ask at what point leaving the braking non-functional for your own personal use is an acceptable option. I've never had a bandsaw with a modern auto-brake, and I actually

Hi, I assume it mounts on a vertical bar. If so, what OD bar is required? Thanks, Imran

Randy is a cheapskate.? I will DOUBLE his offer if shipping is included

I missed what model bandsaw but is the brake injection or mechanical? A mechanical brake on the shaft or motor fan that engages when the power is cut is a different animal and requires a motor than

Hi Paul, I would take a look at the motor brake's requirement. Perhaps a 480/240V transformer with the correct kVA to a rectifier?would work (assuming the rest of the machine is 3x480V).

There are many types of single phase motors and each needs to be connected a certain way to a brake controller. While it is technically possible to wire your 3 phase brake controller to a single phase

Congrats Jared on your new toys...please do send more as you unpack and get them running.? Cute pix of the kiddo...she has a look on her face that says..."mmmm...Dad gets all these new toys...better

Machine in question is a bandsaw, so nothing fancy If you want to convert a 3-phase machine that has a braked motor, can you change it to single phase without needing to change the electronics or do

Oh heck no..I would say its worth 10 cents plus shipping!! LOL

I just got the dual MacClamp setup for my bolt on sliding table for my Shaper. ?The one that came with the slider is shown in the picture. ?No need for it, but I am thinking this may be of some

when I was in the market, my Felder sales showed me changing of spindles on the 700 is easier than 900. I have variable speed and progammability on my SCM spindle moulder (SCM TI145EP), I think the

I love variable speed as an option. But I don't find it imperative as many common cutters are in certain diameter ranges and rpms can remain consistent enough to manage without a lot of belt move

?Ameer, ? That really should not happen and would drive me nuts as DRO is my favorite feature. First a good RPC should not do that if you have the wild leg going only to the motor. I totally

Brett, Both David and yourself make very strong arguments.? ?I do want to by a lifetime machine. As a bonus, it seems as you move up the line, optional stuff becomes standard and softens the blow