开云体育

Thanks Michael! I am in New Zealand :)

Thanks Lucky! It’s only clean because I had to do a video, last time it’s this clean was 3 years ago! I am always busy with production hence little time to organise the shop...

Mike, did you complete the upgrade? If so any comments or suggestions would be appreciated. I do have a copy of the "Hammer C3-31 planer head removal notes" and started to review and make some notes.

Watching other interesting shops, and thought I'd make a video of mine! https://youtu.be/UdG91qxZw30 ( https://youtu.be/UdG91qxZw30 ) Bill Bélanger

Thanks much for posting the shop tour...hats off to you for the organization and thought that went into the design and layout!

-- nice work David, I only wish I had your organizational skills. I’m in this space all the time looking for something. Philip davidsonukuleles.com

According to a service technician, if you leave the rollers engaged for several weeks/months the pressure of the belt can deform one of the fly wheels (not sure exactly what it’s called), and in

Thanks for sharing Albert. The new machine looks like right at home there. Are you in Oz? Cheers Michael

David, I sanded the floors of my small 100m2 house with proper floor sanding machines and that was a nightmare. So my hat well and truly goes of to you and your Bosch! How's the back pulling

Hi Albert: Very cool! Thanks for sharing. You’ve got a beautiful shop there. Nicely laid out with moving around room. I always secretly chuckle to myself that David B. calls his Northfield sander a

Taken 31st May Whats not in the video: 100 sqft Spray booth 100 sqft timber storage 10hp compressor and its shed. 100 sqft clamping room shop is 9m x 6 m (27ft x 18ft). about 580

When planing yes, when jointing no. Kind regards, Jonathan

PC Hinge jig-click see all buying options at

Mac, do recall if that was from Norfield or Northfield, I would like to do some digging and see what I can find. Glen Alpine Moulding and Millwork Inc. Mail: P.O. Box 486 Murphys , CA.

Thanks for all the positive feedback about the shop - much appreciated. I do have to say that sanding the floor with a 4” Bosch handheld belt sander was certainly the highlight of the past two

Mac, I prefer a Pol Roger or Louis Roederer “Magnum” myself. ? Warm regards, Lucky

Northfield had a nice jig that held the jamb on the door edge and you routed both at ounce , not sure they still make but lot less than a magnum martin/campshure/co/llc mac campshure 7412 elmwood

Hi all I am looking for the following tooling that I had as a kid and made the stupid mistake of selling back in the day. i do believe they are long out of production but maybe some of you might have

Is there any reason to unlock the rollers on the planer don't you want them always hooked up. Steve

David B, Thank you for that shop video, You are great at fitting that amount of tooling in your space and making it workable and usable. I know how detailed you are and I am very impressed. I also