Re: Door tooling and jigs
|
Mac, do recall if that was from Norfield or Northfield, I would like to do some digging and see what I can find. Glen
Alpine Moulding and Millwork Inc.
Mail: ?? P.O. Box 486
?????????? Murphys , CA. 95247 Shop: 441 Pennsylvania Gulch Road ????????? Murphys, CA. 95247
????????? 209-540-7501
LIC # 707507
On Wed, Jun 2, 2021 at 6:14 PM Airtight: Clamps by Air Compression < airtightclamps@...> wrote: Northfield had a nice jig that held the jamb on the door edge and you routed both at ounce , not sure they still make but lot less than a magnum Designing and building for 50 years ?Hi all I am looking for the following tooling that I had as a kid and made the stupid mistake of selling back in the day.
i do believe they are long out of production but maybe some of you might have one laying around you want to sell or can give a recommendation on something equal or better.
This is what i had, dont have part #"s
Porter cable door boring jig, it did 2-3/8, 2-3/4, Dills of 1-5/8 and 2-1/4"? it was a great set and easy to use.
Porter cable Hinge routing template set, it was 4 templates adjustable 3.5 4.0 4.5 and i believe 5"? It had bars to hook it all together and i could do 6/8 7/0 & 8/0 doors easy.
and last
Porter cable bevel planer, it was good and I really can do this on my machines, I would buy it anyway for specific tasks.
I guess the local door shop is not doing well and I am getting a lot of requests hang doors, luckily I know this well as I owned a door shop for 10 years?
i am looking to get the basics and see how this goes before I break down and get a Norfield Magnum.
If you have any of these you want to unload, I am interested, Or if you
know of better stuff, I would would like to hear.
Thanks in advance
Glen
Never thought I was going down this path again.
|
