开云体育

Hi Mike , not tape to lift it , to deaden the squeal some. This is where i put the tape… Regards, Mark https://www.instagram.com/kessler_woodworks/

OK The search for a Capable Process has been pursued, using comments from the FOG Success and repeatability has been achieved The template was modified with a 30 mm overlap from the edge to allow a

Hi Joel: For endgrain work, I use the Aigner Contermax for very small furniture parts only. Larger cuts call for the tenon plate, short crosscut fence, and Mac’s clamps, as per David B’s style.

Thanks Mark. Thought it was for pressure after the infeed roller. I like the idea of tape to lift it ever so slightly. Too many folds to bend it evenly (and that doesn’t seem right anyway).

I use the Aigner CounterMax (coping sled) if I’m making a single door. I have experienced some inconsistent registration using the Aigner CounterMax at times, but it’s pretty rare. It helps if the

It is not a pressure plate, it is a chip deflector and that is it’s only purpose. Do NOT push it down , obviously you wouldn’t do that if you wanted it up but if you find that you bent it up too

I searched topics but didn’t find what I was looking for. ?New to me J/P wasn’t self feeding (planer). ?Not too much figuring to decide there’s too much pressure from the plate (ascertained by

Good resources, thank you for sharing, I have heard of the Copecrafter stuff but never knew the real name or where to find them, and it was always from people who "used to work in a cabinet shop". My

I am working on dialing in a "go to" custom profile for the rails and stiles of panels. ?I found that in a cutterhead from Great Lakes with custom knives (see pictures). ?Everything else I have is

For a change there is good description of the saw features in the listing. Interesting features: Integral manual length compensation to keep flip stops accurate at angle Not sure if this is similar to

Joel, Thanks for great post on the making of Shutter louvers. Excellent details on jigs and supplies/suppliers. With all this info I will be making my own shutters. Colin Sent from Mail for Windows 10

Do they speak English in What? No... it would be "Do they speak German in What?" ?LOL

All kidding aside, Felder retort won’t hold water. Having a fixed table in front for profiling long stock and a sliding table on the side for short xcut is an ideal setup. At least for the work I

Say "What?" Again! Do they speak English in What? [email protected]> wrote: -- Brett Wissel Saint Louis Restoration 1831 S Kingshighway Blvd (at Shaw Blvd) St Louis, MO 63110 314.772.2167

I guess many did not get the reference: ?Brett said: "I would guess Felder's retort would be the ability to add outriggers? and crosscut fences to their sliding table system When I heard "retort"

Okay- they also forgot to pack the 1100mm fence, so when that gets here, that piece will make more sense. Jeff

Looks like the bolt that secures the crosscut fence to the outrigger. A.

"Sorry, have not fully followed this thread could you explain the staple issue you overcame to a lay person." I am no expert, and this thread will get buried, but will be available should someone look

I believe Martin's retort would be: ?"What does a fully equipped T-27 look like?"

Yes the sliding table is not in the way if you are doing the profiling.. thats main reason I bought this spindle moulder and whole lot of other upgrades to make life easier on the spindle moulder.