开云体育

Johnathan What its worth will depend on factors like, what year it was built what length of sliding table 900 or 1200mm Whether the sliding table was anodised and what condition it is in. Whether it

No, not much torque at all. A quick twist breaks them free easily. I'm not very strong, so can assure you it's very simple. You will, of course, have to disconnect, move the hose, and reconnect when

You guys keep talking up this front door, we need pics! Patrick

Hi everyone hope all safe? iam contemplating selling my BF 6 -26? as I don't use it as much as I did ,was 3 phase? but had a electronic converter fitted? so it brakes as well , bits and pieces and

On Tue, Mar 2, 2021 at 10:29 AM, Shawn Kammerer wrote: > > Greg, welcome to the group! This wouldn't happen to be the one and only > Greg Mix of Danville, CA, would it? This is Shawn, I built your

Hi Shawn! Yes, it is I. Thanks for the nice compliment, but to the contrary the real work of art in our house is our front door. To this day, when we open it, we often see whoever is standing there

Hello all... been a long time since I've been here.... good to see it's all still going on I have an AD 741 with the power drive and the straight blades cutter head I'd like to convert it to the Byrd

Thanks, Jeff -- those magports seem slick. ? I'd only need 2 for the C341, 1 for the hose and 1 for the bandsaw wye connector, so not the level of sticker shock that I might otherwise experience if I

I use a 5" magport connected to a very short (4-6") length of 5" flex hose. 120mm = 4 3/4" approximately--a hose clamp snugs the flex hose to the machine's dust port nicely.

Hi Ed! I too have a Oneida Mini-Gorilla (cast resin version, ~4 years old), it's sufficient as a dedicated collector for all of my machinery but I'm growing weary of shuttling the hose from machine to

Hi All I have an Oneida Mini-Gorilla with a 5" ID hose ( https://www.oneida-air.com/5-inch-15-foot-clear-dust-collection-flex-hose ) that will be doing the dust collecting from my C3-41.?? If I'm

How about a Hammer unit ? D Sent from my iEye

Buying a BF6 would never be a bad idea, they are plain good old fashioned engineering solidly built. Parts from Felder aren't cheap and not everything is still available That being said I have spent

Hello all, I'm wanting to upgrade from a mediocre table saw, mediocre jointer, and mediocre planer to a combination machine. I haven't found a 741(?) that is both used and in my budget, but every so

Greg, There happens to be one listed on the used Felder site. Link below. It is 3 phase, does not have a spiral cutter but does have Digidrive (numeric keypad).

Greg, welcome to the group! This wouldn't happen to be the one and only Greg Mix of Danville, CA, would it? This is Shawn, I built your entry door years ago, even though you could have done it

Thanks Mike. I can see what I need to make now! Sent: 02 March 2021 17:45 To: [email protected] Subject: Re: [FOG] BF6 Mounting a power feed Richard I have what I think you’re asking

I am brand new to the Felder Owners Group and joined at a friend's suggestion. I'm looking to purchase a used Felder AD 741 Jointer-Planer, ideally with the spiral cutterhead and power drive table

The top plate (hinged) dogs down to the base (the orange handles). Almost moot in my experience given the weight of the power feeder. <richard_markham@...> wrote:

Ah yes! Thanks for that. Are there any lockdowns to stop it lifting? I assume they'd go in the open slots. Just found it on the Felder site. It's only ?300...? I can feel a grinder and welder