I use a 5" magport connected to a very short (4-6") length of 5" flex hose.? 120mm = 4? 3/4" approximately--a hose clamp snugs the flex hose to the machine's dust port nicely.
Hi All
I have an Oneida Mini-Gorilla with a that will be doing the dust collecting from my C3-41.?? If I'm reading my owner's manual correctly, the C3-41 has 2 ports where I'll need to connect it, they are 120mm OD.?
I'm hoping many of you have been down this road and already solved this problem -- what are some good solutions for quick and easy changeovers between the ports?? Is there some connector that I can use to terminate the hose which will then attach securely to the 2 ports on the C3-41 yet detach quickly for easy switching?? Is there something I should attach to the 120mm ports on the C3-41 instead to mate with the 5" hose?
Bonus points if the solution can also enable an easy attach/detach with the 5" OD wye connector which collects dust from my bandsaw's 2 ports.
Thanks for any recommendations!
Ed
Jeff