开云体育

I'd buy a Multirouter in a heartbeat before an FD250. Never liked that machine. It always wanted to pull into the wood. We even added a gas spring device to it to counteract that tendency. We tried

Thanks Everyone. The square hole is the answer. Push a flag head screw driver and then left the handle up, pushing tip down. I could not see anything happening when I did that in the new board w/o

I'm looking for info on the mortising attachment for jointer/planer combos - like the Ad741. Does anyone have experience with it? Is it meant to be put on and taken off regularly - and is it difficult

Yes, great for tight spots when the din rail is loaded with slices, 99 percent of the time we and production use a regular ol’ flat head. I like the longer ones like in the pic, 150 mm as it can

They actually make a tool for that [image: image.png]

Does anyone have the FELDER panel tilting device on their FAT 300S or 500S? Does it work as well as it looks? It looks like it would be awesome for moving sheet goods. I might have to see if I could

Try the Square opening with a small flathead, you just push it in and opens up the spring. I don’t have the exact connector at hand but here is the concept Regards, Mark

Hi Mark, I have tried pushing in the small round and pushing the little sliver of the spring loaded part back and down with no luck. One would think that the green tabs would do something but I do not

Imran, looks like a small flat head above the round where the connector goes Regards, Mark https://www.instagram.com/kessler_woodworks/

I do not want to force anything but gentle poking has not given me a clue about how to get wires out of this connector. This is the new board: Appreciate any help. Imran

Thanks Joe, I was told that Chinese made knock-offs are prevalent and that drawings with dimensions are no longer shared with customers.? Ive been calling and asking for information if the sizes and

Sorry I don’t have one. Can the Felder rep ask if the factory has the design dimensions for the part? I visited the factory in 2010 and the utilization of CNC for cutting and folding metal was

Hello all, recently picked up an RL160 from someone who purchased it at an auction with missing parts.? Its from 2007 - It is missing filters and the tray assembly that holds the brushes and

I don't know if that will work or not. I don't believe it will. Explained below. I wired this back in 2014, so finding some details is harder than it should be. However, this is the relay I bought:

Hi, I am interested does this fit k700 current model year? Can you share the part numbers?

Looking in Thingiverse I found this variation on David's version https://www.thingiverse.com/thing:4185589 [image: image.png] Dave Davies -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

Like others, I also recently got a 3D printer.? I've mostly used it to print custom hose adapters.? I've posted the STL and open cad files for a 120mm to 4 inch quick connect adapter that I use on

We have a 2003 CF741 in our small (15' x 30') shop. ?Use it for remodeling projects (custom fab) that our customers need. ?Has the 7' slider since we don't cut much plywood. ?Just takes planning to

Joe: That was my experience using my router spindle on my KF 700; never had an issue with router bits running at 15000 rpm. Terry

I also ordered an HS950 Dec 31st and was told they had sold so many of these sanders during the promotion my order was securing a spot in the production line and I have not been provided a delivery