开云体育

In my case I believed I won the auction but was outbid right at the end and then the item showed up again on a later auction. Another person told me the same story. As with anything on the internet,

Go the iVac route ( [email protected] | RL-125 Remote start questions ( /g/felderownersgroup/topic/36263646#100534 ) ), ( [email protected] | Remote starting

Mike, First, were you able to wire STW1K? I have heard of Festool bluetooth but not sure if that is what you are referring to. Not that I have researched, but i have not come across many BT solutions,

I did a remote on a RL140 single phase based on what others have already done here, If you look in older message for 2020 you should find this thread. It based on the fact that the RL has an automatic

I have a challenge for the electronically inclined members of the forum and am hopeful someone already had this idea. The ultimate goal is to use the very nice Festool remote button to start my single

Hi Mike: My Format-4 Finish 1102 is a two-head machine with one motor that runs both heads. In my case, the heads are mechanically engaged (no transmission) but have an electro-pneumatic system to

Hi Alex, Happy to help you spend your money. I spent some today but not for a new toy, my brake board on K975 went kaput :( Imran Sent: Monday, January 25, 2021 5:39 PM To: [email protected]

Since wide belts were mentioned, is it possible to get a multi roller (sanding station) version and run with only one thereby lowering the power draw? Having never seen one I am not clear if they use

Paul I remember know that the plate that slides in a groove I attached a piece of phonolic machined to proper thickness to bring flush with table. martin/campshure/co/llc mac campshure 7412 elmwood

Dave, I don't understand " I've had machinery max bid stuff back ". Are you saying that someone that won an item may not get it because Machinery Max didn't think it went for enough so they void the

Keeping watching. I've had machinery max bid stuff back and it shows up on the net auction. Dave ________________________________ Sent: Monday, January 25, 2021 5:39 PM To: [email protected]

Nice...and if they are saying the forklift will be a delayed load because they are using it for loadout you have to feel pretty confident that it works. Dave Davies

Hi Imran, That auction closed today. I picked up the 4x8 lift table, disc sander and forklift. Now just have to get them home during in what is shaping up to be really poor weather. The wide belt

I have a 2011 model year Quincy QT-54 single phase 5HP 220v vertical tank model running on a 20 amp circuit without issue. My use case driving the purchase was to run an automotive HVLP spray gun and

This may help answer your questions: https://flic.kr/s/aHskqy4ZAD David Best https://www.flickr.com/photos/davidpbest/albums https://www.instagram.com/davidpbest/

My 2009 KF700SP has separate start circuit relays for the saw and shaper. Sounds like the saw relay is bad. You can jumper the relay to test the rest. I am assuming the wiring is find unless the

The "new" Casadei machines are close enough to pick up. In particular the F25 tilting shaper currently at $4K. Anyone have experience with the brand and if it is worth pursuing even without a sliding

? Mike, This is made by RUWI and some folks here have this setup. I am not sure how long Felder has been selling it though. I would think it should work on your older slider but I will leave that

I understand this is a new item ( https://us.feldershop.com/en-US/en-US/en-US/en-US/Sawing/Accessories/Tensioning-and-clamping-devices/Clamping-and-saw-system-set.html) but would like to know if

Well, I just got word yesterday (yes a Sunday e-mail) that as my AD-941 was delivered on Friday, I will have to wait until June for my KF700SP and HS950. The wait is two months more that I thought.?