开云体育

I already reassembled things, but I'll try to snap a picture later.? I did take a look at it both engaged and disengaged before reassembling.? When disengaged the belt just runs between the motor

On Nov 5, 2020 20:52, simon.turner88@... wrote: Hi all, Bit of a random topic. I'm building some shop furniture and my OCD side has kicked in. Having a few Felder Hammer machines (the red, dark

Almost every machine in my shop has power from above. Only way if you ask me. Jason Holtz J. Holtz Furniture www.jholtz.com 3307 Snelling Ave. South Minneapolis, MN 55406 612 432-2765

My saw and JP? have? power from over head.?? The power to the saw comes down a concrete block? pillar in the middle of my shop? and then over the several feet to the saw? following the DC

I used Lee Valley piano hinges on a tool cabinet I built a few years ago.? Both doors are 24" wide x 35" tall and 4.5" deep.? I believe they are the same hinges because they measure 1.5" open and

A lot of people think that once it is shipped it is the "receiver" who is responsible for damage, thus most commercial shippers ship that way (FOB or freight on board), and buyers often think that

Try Navy Gray

I would want to be able to take the guard off once in a while. If it was attached, it might be more work. But if you never take the guard off, then no problem. I like the idea of no cords on the

Jeff that is great motor can now be moved to allow new belt install. Could you post 2 pictures, one with feed engaged and one with feed disengaged, it is a very interesting way to get power from motor

Not OCD at all...it would look good. Dave Davies -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

In this case I am thinking, simplistically, of insuring with the shipping company, Hawaiian Express. I suppose there may be options for third party insurers.

https://www.mcmaster.com/piano-hinges martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

Hi all, Bit of a random topic. I'm building some shop furniture and my OCD side has kicked in. Having a few Felder Hammer machines (the red, dark grey and light grey ones), I want to paint my cabinets

Guden has many types of material and sizes, and made in the USA. https://www.guden.com/Control/Continuous-Hinges <https://www.guden.com/Control/Continuous-Hinges> Brian Lamb blamb11@...

my experience is that the damage has to be reported at the time of receipt of goods to have a chance of recovery. so be very diligent and report ANY anomaly. my used slider crate (crated by the

Joe, give me a call 5416098113 Mark

I would highly advise the insurance. Just make sure it's from a source you can collect from if necessary. Marlowe McGraw wrote:

Is it advisable to add shipping insurance for the full value of the Felder equipment. That's an additional $500 coming to Hawaii, but maybe its a good idea, even though it doesn't seem common with

Alain, This website offers some info about the strength of hinges. Some of it was not intuitive to me. https://ww2.spep.com/public/Webpictures/iStore/images/HingeGuide.pdf I used 2 1/2 inch wide

Hi Mark and Fred, I am now in Bend too. I am building some temp walls for an art studio, is it possible to share a source for materials? In New Orleans I used a lot of Red Grandis as it was cheap at