开云体育

I seldom see quoted messages on most posts. I read and post using the WEB.? I wonder if email posting is different.? Their might be a setting for your email preferences.? If I want to add a quote I

I wonder if the forum can be setup so that replies do not automatically include previous messages and that if you want to reply to a quote you have to manually use an “insert quote” function.

I? suggest a little investigation into the expansion and contraction of the different? lumber species? as regards temperature and? humidity.? Both variable will swing? especially near a

As John said....polymer! If you are putting a coating on the finished faces good idea to keep them even both sides..... to stop any fighting. jonathan

Yah man, also we have found that citrus cleans up PL when you find it where its not suppose to be. Have to thank my son for that tip. airtightclamps@...> wrote:

John thanks your suggesting us pl to lam Boards to panels and faces of panel to panel Like 2” perimeter bead and large x corner to corner ? martin/campshure/co/llc mac campshure 7412 elmwood ave.

It's the age old issue of folks not cleaning off their replies. When responding in a thread, leave the message you are specifically replying to and delete everything below it in the thread. We can ask

If I was doing this for myself like you are I would use PL premium and make a sandwich. If you are glueing the cherry together a couple of lines of PL with a little space to hold each hemlock board.

Refund so to speak just what you see is what you get , minimalist contemporary raw lime plaster smooth walls . martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106

My place , bathroom door Pretty well controlled 20 to 60 percent humidity an average temp 70 martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell

First question I would ask is it going into a house with a large humidity shift during the year. Also are you going for a complete rustic look with gaps or a refined look. airtightclamps@...>

Here is a rough sketch martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell 608-824-0023 fax airtightclamps@... airtightclamps.com Designing and

Greetings: Thought I would throw this out for ideas. not that I haven’t built 1000 ash and doors but all stile and rail traditional it euro. this is different and it is for a sliding interior door

If I had to guess, I would say that seam is there to prevent it from bowing and for support.. just a guess..

Another thought. The standing seam is riveted on. So there had to be a reason it is there. Anyone knows? Imran ? Okay there is no up/down movement in the bearing carrier plate. This is how it was

Okay there is no up/down movement in the bearing carrier plate. This is how it was installed There are two alternatives. Bearing cages can be installed on the other side, which is how I started see

I'll check mine today when I get to the shop and report back what I find..with pictures to show..hopefully

Moderators & et al., I hardly ever see msgs on the web interface. Today I looked at one and noted how each msg includes previous msgs. It was very annoying to scroll down and pretty soon msgs became

Mac is correct ? Regards, Mark

Didn’t pay attention to that until u mentioned it, wide angle on the iphone pro Regards, Mark