开云体育

https://youtu.be/LVYUss6pJqQ This is a very good Felder video demonstrating the technique using the slider, you can find the use of miter index at around 7 minute. I have the miter index with length

Anyone knows of a video(s) where one can observe/watch the "Precision mitre guide with length compensation - Option 173" at work? I can picture the procedure after reading David's description, but a

My guess is that the pictures are treated as attachments and as such, they are not permitted according to the statement on the group's homepage. "Attachments are not permitted." Consequently, they are

Hey Mac I have a Milwaukee 1/2” drill driver for about two years good wrist snapping torque ! It has served me well I’ve got the extension on the slider mounted I will have to send you pictures

It is not just you. I cannot see the pictures either. I can see the pictures Joe and Mac sent in their email. I believe they send email with picture using iPhone. James

i can never see pictures for some reason all i see is jpeg 1 etc.

Greetings I did pick up the Milwaukee fuel surge a few weeks ago and it is rad ,,,lots of snuff if needed it has four settings three for different torque settings and one for drilling. I have used on

Thanks David for the explanation. I opted for Option 81, the over head saw guard, which makes Option 91 incompatible/not applicable. :)

30mm spindle is one of Felder best bargains for the 700 series. When I ordered my F700Z in 2011 I ordered with a 1 1/4" mainly because of it being the NA standard and it was the more costly of the 2

When you order the machine, you need to specify a spindle. But they should be able to take the spindle in the machine and swap it for a 30mm if that is what you really want. They have extra spindles

Hi Joe I do not feel 30 years old is very old for woodwork. Much of the modern standard is a 50 life span at best. It's sad because trees will often take 100 or more years to grow to where they will

Getting 1 1/4" shaper cutters isn't difficult. I order from Greg at Rangate and the quality of their cutters is excellent. Dave [felder-woodworking] <felder-woodworking@...> wrote:

The hinge point on the Hammer C3 tilt bracket is at the top next to the attachment rail - on most of the other Hammer/Felder tilt brackets the hinge point is further away from the rail by a few

I don't see the images. The few times I've tried to attach pictures they were also stripped out. felder-woodworking@...> wrote:

That is most likely the same machine, a KF700SP with 9’ slider, manual controls with dial indicators. 49” rip. I would have ordered the smaller rip but the deal was to good to pass on. They were

David: How did you get into my shop and take the pictures of my mess? We don’t even know each other. Gil Fuqua One of the advantages of being disorderly is that one is constantly making exciting

Imran, That is great. No problem, I can wait, it is not urgent. I can lift and lower the heavy F48 :) Thanks, James <felder-woodworking@...> wrote:

James, I do not have hammer but looking at the pics the tilt away mechanism is different for Felder vs Hammer. I have the gas spring attached to the bracket on my Felder. The bracket engineering print

If I remember from the original postings many years ago it was for leverage and mechanical advantage. Never done one as I have really no need for one and zero interest. I do remember the discussions

Option 11 is a switch that controls the rotational direction of the shaper spindle. Option 91 is a support arm to hold the extraction hose to the saw guard when the Euro II style saw guard is used and