开云体育

Great Forum I think I will wait on the purchase,maybe look at prices at the AWFS show in las Vegas come mid July Thanks

It’s worth about $5,000 IMO. David Best

It does not have the silent power cutterhead,says he has an extra set of knives Thanks

well, when I bought my AD741 with power drive and silent power at woodworking show in Toronto in Nov 2015, it was about CAD 10K plus tax. Factored into the exchange rate at the time (1 USD = 1.3375

Richard, Does the AD741 have a silent power cutterhead? It like new condition with low use it seems OK. I was concerned when you mentioned the AD751 because those are certainly not worth $7400. I

Hi Joe The jointed/planer is AD 741 not a 751 i guess I pushed the wrong key The owner said its a 2012 of a 2013 it also has the Power drive It appears to be in great shape would 7,400 be a fair price

My 1999 C3-31 had two issues. The first was that the massive cam clamp, which turned out to be real overkill for the application, moved up and down on a round post that was also the used by the miter

Mac, The machine was made in 1999 and is a C3-41. Tilting spindle. Thanks. Dan

Dan you should mention type and year of machine martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell 608-824-0023 fax airtightclamps@...

Clean ways and check for dirt on the stop bolt if that fails adjust the bolts best to put a dial indicator on the spindle and sweep 360. Different modeled have different adjustments you will have to

Yes the stop collar is on the horizontal screw that tilts the spindle. Jerry P

Thank you for the help. I am talking about the spindle being square to the table. Where is the stop collar? Is the the stop collar on the horizontal screw that tilts the spindle? Should I move the

Check for saw dust on the lead screw stop collar or adjust it. Jerry P

You may clarify if this 90 deg you cannot achieve is in the direction the spindle travels or you are talking about the other direction, that is inline with material feed. I have a diff Felder machine

Richard, Is it a 751 or 741? Do you know what year it t is? Joe in New Orleans

I wondered if anyone has had to adjust their spindle . Mine does not get to 90 with about 1/32 showing at the top of the spindle against a square. Any guidance would be appreciated. Dan

I 100% agree Felder sevice techs are more than disappointing. Regardless if the machine is new i would hold them to it. Play hard ball, be amicable but stern if you are rud or an ass they will ignore

I have a chance to buy a almost new,barely used AD 751 jointer/Planer Extra knives and Mobility kitsingle phase for 7,400 dollars.Would this be worth looking intoany suggestions greatly appreciated

Hi James, Thanks for the info. Unfortunately the setup guide is for the older model A3-31, I think I can see where they differ and where they are the same and surmise how I should adjust this model,

No problem with that set up just be sure to allow for overhead saw guard arm. Dust and electrical come off that side also. Mac,,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi