开云体育

"Nice tractor, and easy access to the shop. I am almost envious. I had to pay $1,475 for a rigger to move my saw, and then another $625 to repair my lawn after the rigger drove over it. ? -- John

Hello fellow woody's. ?I received an email from a mom who lost her son and wants to give his Saw-stop table saw away to a passionate woodworker. ?Im in Napa Ca. so they must be nearby, so any of you

Nice tractor, and easy access to the shop. I am almost envious. I had to pay $1,475 for a rigger to move my saw, and then another $625 to repair my lawn after the rigger drove over it. ? -- John

It's nice to have a tractor to move stuff with.? ?OH, and nice new Plan 51.

Never mind the jointer, check out that tractor!! -- Kerry Smith Gotham Woodworks www.gothamwoodworks.com

?Here is an update: Per Grex I did a test in hard maple with pressure set to 90 and 95 PSI and did nailing with gun in parallel and perpendicular orientations. Red indicates pins are proud of wood

Colum, “We are going to look at the toe out issue” I don’t want to tell you what to do but I suggest you follow the investigation logically and from least to most invasive. You have not shared

Bon,looks like nice mate to the Northfield facer martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell608-824-0023 fax airtightclamps@...

Congrats on the Plan 51L! I had a A 951L for a short time, it was a great machine, I imagine the Plan 51L has some nice creature comforts. Looking forward to hearing your experiences working with it,

Damn. Nice tractor. [email protected]> wrote:

Thanks to everyone how has contributed. We are going to look at the toe out issue and see if we can nudge the slider as Daid mentions in his Survival Publication...Wish us luck !. On the machine v

Here's how the Plan progressed, Plan 51 going into the shop- All went well.

Christopher, I understand your point of view. A skilled WW can do many tasks faster by hand than on a machine. I am just not there and likely won’t get there in the next 10 to 15 yrs (God willing) I

Coloum I have 2 blades that do exactly as you described, doesn't matter how far up or down the blade is. I've put it down to the blade being out of balance. [email protected]> wrote:

Just browsed their catalogue and wish I could have installed those in our kitchen but not interested in ripping the house apart again…

I get that totally! I just find it more satisfying to work with the wood rather than fuss with the machine. So a little error off the machine can be quickly resolved with a hand plane or other

I can glue panels straight from the saw. I have done it for shop items and other non-critical glue-ups. Jointing edges prior to glue up on jointer does give a very nice flat surface but in the end I

Sorry to all the machine-heads here, but isn’t this why we use hand planes? Just wondering? I never trust an edge straight off the saw… any saw. Just sayin. Chris Rozycki

Imran, Looks like you visited The Bund (#1 tourist attraction) and probably 豫园 (chinese temple, popular attraction). On the famous downtown pedestrian street (Nangjin road) close to The Bund (the

Hi James, I don’t doubt it at all. I was just saying that I didn’t see them. In fact, other than the old temple everything I saw was brands from west, in “downtown” by the river. I believe the