开云体育

Typical slope specced for the houses we've built in LA is 2" towards garage doors.

Gidday Associated with this, but not to do with levelling machinery, what is the slope put on such garage floors for drainage? Expressed as H/L My son has a problem on a new construct and he is

My K3 had leveling feet (or was it part of the mobility kit?) Anyway I just order some Mcmaster

I picked up my slider today from Felder warehouse in Sacramento and dropped of my old K3 slider. I rented a 12 ft trailer from United rentals. loading up the K3 was super easy with the mobility kit

No, most folks just sit them directly on the concrete. Brian Lamb blamb11@... www.lambtoolworks.com

The saw doesn’t come with leveling feet?

I was hoping to here about the proper coffee to consume before putting the legs on….. Mike M.E. Blake GC

That was my original suggestion, one size shorter on the belt. Vacuum what will come off and then paper towels or rags for the rest. Brian Lamb blamb11@... www.lambtoolworks.com

So today I opened the machine, as you guys suggested, I tightened the drive belt after opening the 4 screws of the engine, it actually helped a lot and there is a significant reduction in the noise.

Good one. Or how about how to couple a 4” flex hose to an 80mm dust port? Or 30mm versus 1?-inch shaper spindles. ? David Best DBestWorkshop@...

To be fair, I was thinking it was time to talk bandsaw blades again to see if anything's changed. HAHAHAHAHA. ;) [email protected]> wrote:

Hi David: That sounds like too much common sense!!! ? Maybe most of us receive the posted emails into our inboxes and don’t log in? I know I only log in to check for relevant posts before writing

Makes me wonder if members ever search the FOG archives. Many of the same questions come up on two year cycles. Leveling feet is one of the hearty perennials. Follow this link: Re: Levelling feet for

https://workholdingcomponents.mortonmachine.com/category/leveling-mounts-metric-leveling-mounts? Leveling Mounts, Leveling Pads workholdingcomponents.mortonmachine.com Brian Lamb blamb11@...

I was hoping someone will reply with feet that others have recommended in past. I bought one similar to the ones with glued black cushions on the bottom from McMaster and the cushions slip out from

Thanks to both of you. ?I have ordered what I need for the Felder from McMaster-Carr and I am returning the other feet I had on hand for the different machine. ?Easy enough!

I saw this come up if someone is looking for… Mike M.E. Blake General Contractors

Mac, I like that verticals jig! Tim [email protected]> wrote:

The K500S/K700S leveling feet holes are sized for M10 bolts.? If you are leveling on a concrete garage floor, then I would recommend getting anti-skid rubber feet.? If you use steel feet, it will

My K700S has four leveling foot locations. Leveling feet are helpful for setting up the saw also - get the saw top straight and true in order to align the slider to the table top. I used leveling feet