On May 2, 2024, at 2:25?PM, Brett Wissel via groups.io <Brettwissel@...> wrote:

To be fair, I was thinking it was time to talk bandsaw blades again to see if anything's changed. HAHAHAHAHA. ;)

On Thu, May 2, 2024 at 3:35?PM David Luckensmeyer via <dhluckens=[email protected]> wrote:

Hi David:

That sounds like too much common sense!!! ?

Maybe most of us receive the posted emails into our inboxes and don’t log in? I know I only log in to check for relevant posts before writing a post of my own. So your comment/suggestion is well taken.?

Warm regards,

Lucky

---

From: [email protected] <[email protected]> on behalf of David P. Best via <dbestworkshop=[email protected]>
Sent: Friday, May 3, 2024 6:24:49 AM
To: [email protected] <[email protected]>
Subject: Re: [FOG] Machine Leveling

?

Makes me wonder if members ever search the FOG archives. ? Many of the same questions come up on two year cycles.? Leveling feet is one of the hearty perennials.? Follow this link:?

Re: Levelling feet for CF 741 groups.io <apple-icon-180x180.png>

David Best - via mobile phone?

On May 2, 2024, at 12:59?PM, imranindiana via <imranindiana=[email protected]> wrote:

?I was hoping someone will reply with feet that others have recommended in past. I bought one similar to the ones with glued black cushions on the bottom from McMaster and the cushions slip out from underneath, as already mentioned by John H.

Ones others have shared that seem to work are of following design. Part below is for reference only. You should be able to search leveling feet on the FOG web interface and find the actual recommended part.

Imran Malik

On May 2, 2024, at 3:22?PM, Agavewoodwerks via <Agavewoodwerks=[email protected]> wrote:

?Thanks to both of you.? I have ordered what I need for the Felder from McMaster-Carr and I am returning the other feet I had on hand for the different machine.? Easy enough!

--

Brett Wissel
Saint Louis Restoration
1831 S Kingshighway Blvd (at Shaw Blvd)
St Louis, MO 63110

314.772.2167
brett@...