开云体育

I installed an M503L on my bandsaw fence and ran into a problem. I keep getting E07, meaning failure of magnetic field detection, or it shows miniscule changes across large distances. The only

Thank you for your feedback. Does the Shelix give a high quality finish? Is anyone using another type of cutter head that they could recommend? Thanks Phil

Hey Just jumped on my PC as it's easier to get the next bit of info. My experience with shelix is positive in the way that they are very responsive to questions and updates on the production wait

Hey It's not only in Australia. They just don't want to sell it as an upgrade. I tried it several times (Belgium). In the end I bought mine through www.shelixheads.com. It only mentions the A3-31 but

This looks a lot like 401-136 since the belt grove is elevated. What would you consider selling it for?

Hi Philip, I came across there spiral heads once, but have no personal experience with them. Have it look or contact them if they don't have the head listed you need.

Could you get a member from a different country to get one and send to you ? Roger

In Australia Felder will not sell me a spiral cutter head for my C3-31. My only option is an aftermarket version. Can anyone make recommendations here? Thanks Philip

Thank you Jonathan

Yes, it is in the files section written by Mark Thomas:

I noticed these have been listed to woodweb with a contact phone number and link to a more complete auction catalog. I would check there. I bought a FAT 500 from them earlier this month.

Did I imagine it, or did someone post a good while ago, that they successfully retro fitted a spiral cutter head into a Hammer planner. I have a noise problem with my C3- 31 and I don't really want to

Hi Terry, I happen to be carrying out a calibration on my dual 51. I had not noticed the change in tone on the elevation motor before but I certainly hear it. It sounds like something turning on and

I believe what you are seeing is the difference is toe-out of the slider versus the rip fence. When properly aligned the slider angles away from the saw blade as it moves forward, whereas the rip

James you just described my first day operating a slider. It's a feature, not a bug! Has also been discussed multitudes if you search the database....basics: 1. Yes, the bump stop is accurate if you

I have been attempting to use my rip fence on the right hand side of the blade as a bump stop for multiple narrow rip cuts in 8ft mdf sheets, rip fence pulled backwards to avoid any binding. With my

FYI My inserts are quite large . On my SCMI SI 16 TW my whole saw assembly moves 5” to left of slider quite handy win ripping away from slider or pre cutting part before end profiling on shaper.

Torx SoftGrip T-Handle T20 wihatools.com martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com

Hi Terry, I used to remove difficult inserts for Ortli tools when they had a branch in middleton. If I recall I would apply heat with a propane torch to the screw head and when hot apply little slick

Same. but for the jointer/planer. No response. Let me know if you find contact information for him.