开云体育

That wouldn’t really work too well as the plug that slides in is in four separate portions, so it will expand. Could make the first part of it solid, but then cone point set set screws are only

The following files have been uploaded to the Files area of the [email protected] group. * /3D Printer Files/Non DRO stepped V2 2.5 inch long.stl (

That would also mean recalibrating the extension portion of the fence, not worth the trouble. I just uploaded a 2.5” long version that should work for everybody with the Non DRO fence. Brian Lamb

?Here is another wood version for the nose, visual instructions to build your own in about 1 hr… https://www.instagram.com/p/CJljZYaD-ms/ Regards, Mark https://www.instagram.com/kessler_woodworks/

Guess you need a new search engine: http://www.davidpbest.com/VA/StonehorseShop/Felder/Splinter_Tongues.htm <http://www.davidpbest.com/VA/StonehorseShop/Felder/Splinter_Tongues.htm> David Best

You are joking right? You can’t drill a decent hole 1-inch long? David Best

David, ??? I think you forget that Felder doesn't make drill presses. We can make wooden blocks, but drilling holes?? Nah.? That's a problem.? ? --Michael

OK,? I give up. I admit defeat.? I can't find "Splinter Tongue" on the Web. What is a splinter tongue?

Have you all considered 3D printing just the plug-end of the thing that friction fits into the crosscut fence extrusion, and letting the individual users make their own Splinter tongue out of wood

Are the tapes glued in place on those machines? My slider has a tape on a metal backing and can be adjusted so fence can be moved to fit the insert and the tape moved to match the cut. Dave

So far I have heard 2” and 2 3/8” long to the blade, so roughly 61mm for 2.375”. I can re-design the model accordingly, just don’t want the next guy saying 2.5”. You will need to print at

The DRO version on the left fits my Kappa 400 and one other person’s so far. The Non DRO on right I have not been able to get any feedback on.

Here is a picture of the two different fence extrusions (well, the current X-roll, DRO and Non-DRO). The Larger DRO unit fence is on the left, the smaller, non-DRO is on the right. Two different

Correct, for the NON-DRO model, I didn’t do a design for the large DRO fences with the split stud mounting. If folks figure out the distances, I’ll re-design both with enough meat on the end to be

Brian, What you see with the holes is the one you labeled the newest. Bill [email protected]> wrote:

Thats doesn’t look like the proper fence extrusion for the non DRO stop, I think that’s the DRO version. Try printing the other model. Brian Lamb blamb11@... www.lambtoolworks.com

Hi. Here are some pictures of my situation. It did need to be a little longer as per pics and I had to trim the width of the tongue where it fits in extrusion. I gave a kappa 400. Trimming width was

Right, so it looks like I will need a measurement from the saw owner before I print anymore. I thought these should be standard. Hold the presses! ? Bill Belanger

No problem, there are so many variations in this stuff though, creates a major pain in the butt. Brian Lamb blamb11@... www.lambtoolworks.com

Sorry Brian, just trying to make a suggestion that might work for everyone. I have zero interest in a 3d printed splinter tongue so I should have stayed out of it, my apologies Regards, Mark