开云体育

So a friend wants a live edge mantle from an Ash log. He already has the log cut on the band mill. It is 11” deep (sticking out from wall) and 7.5” tall (vertical). The mantle will be 5’ long. I

I didn't feel and chatter. I was wondering about the feeding against the grain. I did a glue up of two boards and I didn't think about matching grain direction when I did them. Looking at them I may

Was there chatter during feed? If it was hard to feed that would be a sign of dull blades. You can also check the chips. Nice curly chips indicate sharp blade. You can also try planer and if that

Now that I've replaced the belt on my jointer and can use it again I tried a light pass (1/64th) on some cherry this evening and ended up with a very rough finish. Any suggestions what I'm doing

Perfect. As well, we’ll get you into the “Cambridge Split Infinitives Club” before much longer!! Warm regards, Lucky

I had a wall raising for my workshop. With the help of my friends mostly engineer coworkers, we raised 4 walls and braced them. Anyhow, since that day i am known as Mr. 1/64th Imran

I've been hunting for used, local felder machines (and other woodworking machines) for 2-3 years. From the used sales I see, the tooling is worth as much or more than machines. If you don't need some,

Hahaha. Yes, I went through a re-branding phase. Current calling card - now that I’ve been inducted into the Oxford Comma Society, even this needs updating LOL. David Best

Nicely said David. I prefer your later descriptive alias: “bon vivant et raconteur”. Isn’t that on your current business card? I love it. Cheers, Lucky

I’ve been called a lot of things in my life. Here is my calling card from high school to prove it. So if you want to call me David Worst to distinguish me from the other David B, I am already

How long can snapping a few pics and typing out model numbers with a price take ? Dave Sent from my iEye

All good Imran. I was just enjoying the fact that we have two David’s with a surname starting with “B”. I’m just being silly. Take care, Lucky

Haha! I like it! Warm regards, Lucky

Lucky, I replied to David Blehar’s post. Imran

As we're gearing up to get our mill and lathe my son is becoming exposed to David Best and after going through his flickr albums he tells me he knows why he's not David "Good Enough". Dave Davies

Which David B. ?? There can only be one David B. on FOG I think, and that is surely David Best. David Blehar, do you have a nickname? I’m David L., but I’m glad I go by Lucky here. Too many

Thanks Brian! -- Mike Barrow

David B, Thanks for sharing the roller height calibration #s. Imran

If you had nothing, and most of the accessories were something you need, this would be ok. Lots of cutters that look unused, likely they would be unused by you. One option would be to see what you

perhaps the feed rollers need an adjustment beyond just the spring tension? Most of you guys in this forum seem have this info already, but the specs I got from Felder when I tuned up my AD741 were as