开云体育

I have one of Brian's parallels and agree it is the one to buy. I don't use it often as I have a power feeder on a saw for ripping but when I do, I set the crosscut stop, and then use Brian's square

Very interesting, I do have lamb parallel fence (not the DRO) and tried to avoid mixing crosscut and parallel fence cuts in my design/assembly to avoid this issue. However, I like your method but I do

This has been discussed many times here. I recommend you search the archives for “parallel fence”. IMO, a better alternative to the Felder parallel fence would be one with a DRO rather than an

Specifically 430-149. I have seen a few you tube videos, but has anyone used the incra with good results? I have it for my router table and seems like a better play. Thoughts? PK

Chris, Thanks for the update. Imran

Happy holidays - I finally received my Chinese made laser from eBay. I mounted it on a magnet and hung it on my overhead arm. At 8 feet, the line is significantly dimmer although I can still see it

Well if the body is plastic be darn carful Tightening the set screw or you will FIU The old ones the body was a tuna can and they held up. Mac martin/campshure/co/llc mac campshure 7412 elmwood ave.

funny martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/ Designing and building

Mark, reading the recent post about bump stop reminded me that i did not reply on this thread. it has been a month or two that i used the rip fence again for bump stop for a full sheet. no binding. it

Ihave 10’ slider for 30 years my use is pretty general mostly mill work little furniture and case goods I only use slider to left for case goods ,, I don’t have the time to do the screwing around

Jonathan, Thanks for the tips. I'm new to the full sized sliding table so all these tips are helpful. I'm trying to do all my cutting to the left of the blade, it seems to have the potential to be the

Mac beat me to it, i just saw that somewhere maybe look on there ig account- it was pretty nifty! Regards, Mark https://www.instagram.com/kessler_woodworks/?hl=en

Ben Rock pleasant machinery has a clever way of spreading the glue , he has a short video on his Instagram account but I was not able to copy it . Ratchet with socket advances the gap around the tire.

I believe the easiest way is to get the tire on first. Then you can peel back and squirt or spread the adhesive and work your way around. Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South

The tire problem is back. I installed the new tires from Felder. They were much tighter than the originals. Very little use since then. Beginning of December the tires came off. Top and bottom. sent

######## sorry I found out . I found a video on the A3-31 planer height gauge. Sorry again. Doug On Friday, December 11, 2020, 06:15:17 PM EST, Doug Middlebrook via groups.io

Would love a copy of the cnc files for the torsion table too. Mine is not big enough to do in one pass, but I think I can index and move the panels to do it in two. Drew, can you upload to this group,

You should be able to post the CAD file in the folders section of the forum. Dave Davies [email protected]> wrote: -- Dave & Marie Davies www.myfinishingtouch.com 318-219-7868

?HI, I would love to get the fusion file as well as I was interested in building something similar. Please. Thanks Elwin Sent from my iPad