Re: Laser Kerf Line for slider saw?
¿ªÔÆÌåÓýHappy holidays - I finally received my Chinese made laser from eBay.? I mounted it on a magnet and hung it on my overhead arm.? At 8 feet, the line is significantly dimmer although I can still see it which is probably good enough for aligning the tail end of a board. ?I have a bright 3 car garage with 11 LED light panels.? The laser mount is difficult to adjust. I found it easier to lock the mount and just rotate the magnet. ??? ? Chris Perren ? ? ? ? ? ? ? ? ? ? ? ? From: [email protected] <[email protected]> On Behalf Of imranindiana via groups.io
Sent: Tuesday, November 24, 2020 1:54 PM To: [email protected] Subject: Re: [FOG] Laser Kerf Line for slider saw? ? Chris, ? would you please share your experience with the green laser. i would like to know if you can see it easily in well lit shop. ? imran
? Thanks ¨C I¡¯m going to give it spin¡ worse case its $50 on a proof of concept. ? Regards, ? Chris Perren 512-415-6951 ? From: [email protected] <[email protected]> On Behalf Of Brian Lamb ? In the ad it says1-2mm wide at 1m, and 2-3mm wide at 3m. So I¡¯m guessing about 2mm, and given your blade is about 3mm, that should be fine enough.
?
? |