开云体育

According to Felder, this CNC machine is built for wood and plastic. Interested to read feedback from owners with actual knowledge on metal cutting on this machine.

Quinnsaw.com in St. Louis, Missouri.

IMO this is a deal-breaker for such high end computerized shaper. Felder should issue a recall like the auto industry and offer free repair to the customers asap. James wrote:

Lucky whats Felder's position on this problem? I believe this is the first time on this forum the issue has been brought up. I could see this being a real a problem for the door and window guys or

Warren, Lennox CT Woodmaster, 27mm, 1tpi is magnificent. I resaw hardwoods here in Australia a lot, including Zebrano. It’s a wonderful blade. I have a couple of bandsaws including an older Felder

Hi All, New to the group so forgive me if I have missed this post from the past, I did search but couldnt find anything on this topic. I have the FB710 bandsaw and recently I have a number of jobs

I know nothing about how these DROs are implemented. From comments it appears it looses its absolute position. It is not too difficult to add indexing for dead reckoning. For example on engines we

Wow. I'm disappointed to read this. I was considering buying one later this year. Looks like its back to the drawing board for a DRO on my KF700.

I would agree!

The cuts on the outside edge of the piece were terrible, but the later cuts were OK.? These cuts say nothing about the machine however since the guy had no idea what he's doing vis-a-vis feeds,

I have a DIY gantry based system, like this, and for wood it's pretty good. Metal is a different beast and while you can get by, the tolerances required for good finishes are much more difficult to

On Mon, Feb 24, 2020 at 01:01 PM, Sang Luu wrote: > > Thank you. I will keep the Euro Guard Setup (Felder) as it comes with the > machine at no charge (at least that's my current understanding).

The system I used when I had miles of edging to flush up was a variation on the Aigner and cost very little. I cut a piece of 1/2” ply to fit the top of the shaper and held it back from the fence by

Maybe others can shim him with some knowledge, but the aluminum cuts look very bad. Last time I cut metal was 20 years ago with professional machines, so I might not have the right comparison, but the

You have to pay attention to what your milling, carbide for ply and PB martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell 608-824-0023 fax

I have this Dimar cutter head for both 40mm and 50mm knives with limiters, very nice. James

I have an unused - used set of Felder 6 piece for 30mm spindle available. Jon S Sent: Wednesday, February 26, 2020 7:22 AM To: Bill Bélanger; [email protected] Subject: Re: [FOG] Edging A

A universal profile cutter head with profile knives and limiters would be your cheapest option. Profile 034 and 035 would accomplish the profile your asking about. The limiting factor here would be

Same experience here. Every time someone showed up to commission one of my 5 new machines with sliding table, I had already installed the slider. No questions asked, they took whatever time required

Here's the overarm mount on my Panhans saw. It seems to be the perfect solution, and super simple. I would think you could retrofit just about any saw with a similar system. Jason Holtz J. Holtz