Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Felderownersgroup
- Messages
Search
|
Re: AD 741
Glen ? ? Sounds like a great plan it's all about having fun and making good stuff.I'm a weekend hobbyist enjoying making sawdust and have an appreciation for well built machines,I think having a Ad 741 or 941 would be a nice addition. Next up getting the Wife's blessing Thanks again On Jan 30, 2017 8:43 PM, "GLEN chris3645@... [felder-woodworking]" <felder-woodworking@...> wrote:
|
|
Re: Adjust shaper spindle to 90 on C3-41
OK.? I got to the collar to adjust the 90 on the spindle shaft.? I found that I have a larger issue.? The horizontal threaded shaft is loose where it exits the side of the machine (where the handle is) .? The 90 degree collar is actually holding the shaper from swinging toward 45 degrees.? It seems that there must be something missing that keeps the shaft inside the cabinet but able to turn at the same time.
Dan |
|
Re: AD 741
GLEN
I think its has to do a lot with what your intentions are with the machine. Production shop running all the time or weekend hobbyist There are better machines and worst machines. When I started a had crappy machines due to money but I could make good stuff, it just took me a lot longer to produce a good product. today my shop is going to be a play room with no intention to really make money. Therefore I came to the conclusion that the felder tools should? be fine for what I intend to do. The Kappa will be the bar top, the 941 will be the back bar, and the profile will be the table in front of the bar. I will use the tools and my friends I might let use the tools but its more about having some fun with my construction friends.
toggle quoted message
Show quoted text
First project: bar stools -----Original Message----- From: patrick walsh pwalsh651@... [felder-woodworking] To: felder-woodworking Sent: Mon, Jan 30, 2017 6:44 pm Subject: Re: [felder-woodworking] AD 741
?
I will offer the same. I payed $10900 for my AD941?a couple years ago equiped exactly as you have yours?speced.
I love the silent cutter head.?
Im ok with the machine not in love.
I dont think i would purchase a used Combo machine. If i did it would have to be a really really good deal and i would have to be able to run?number of boards over it and kick its tires with my straight edge and?oneway gauge at the very?least.
On Monday, January 30, 2017, GLEN chris3645@... [felder-woodworking] <felder-woodworking@...> wrote:
|
|
Re: AD 741
patrick walsh
I will offer the same. I payed $10900 for my AD941?a couple years ago equiped exactly as you have yours?speced.
toggle quoted message
Show quoted text
I love the silent cutter head.? Im ok with the machine not in love. I dont think i would purchase a used Combo machine. If i did it would have to be a really really good deal and i would have to be able to run?number of boards over it and kick its tires with my straight edge and?oneway gauge at the very?least. On Monday, January 30, 2017, GLEN chris3645@... [felder-woodworking] <felder-woodworking@...> wrote:
|
|
Re: AD 741
GLEN
Hi
toggle quoted message
Show quoted text
I just bought a AD 941 with the spiral cutter, euro comfort, and power drive. I paid 11k out the door if that helps for a comparison, You can get a quote from felder to see what a new equivalent unit goes for, and I dont know much but I would tend to lean towards David B advice as he knows a lot about all of this stuff. Offer 5k and see where it goes Glen ? -----Original Message----- From: rjeep82@... [felder-woodworking] To: felder-woodworking Sent: Mon, Jan 30, 2017 4:41 pm Subject: Re: [felder-woodworking] AD 741
?
Great Forum
I think I will wait on the purchase,maybe look at prices at the AWFS show in las Vegas come mid July
Thanks
On Jan 30, 2017 2:46 PM, "'david@bestservices IMAP 2' david@... [felder-woodworking]" woodworking@...> wrote:
|
|
Re: AD 741
Love my silent power cutterhead Dave On Mon, Jan 30, 2017 at 4:46 PM, 'david@bestservices IMAP 2' david@... [felder-woodworking] <felder-woodworking@...> wrote:
--
Dave & Marie Davies
318-219-7868 |
|
Re: AD 741
Great Forum I think I will wait on the purchase,maybe look at prices at the AWFS show in las Vegas come mid July Thanks On Jan 30, 2017 2:46 PM, "'david@bestservices IMAP 2' david@... [felder-woodworking]" <felder-woodworking@...> wrote:
|
|
Re: AD 741
toggle quoted message
Show quoted text
|
|
Re: AD 741
It does not have the silent power cutterhead,says he has an extra set of knives Thanks On Jan 30, 2017 12:07 PM, "Bellsouth dohertyj@... [felder-woodworking]" <felder-woodworking@...> wrote:
|
|
Re: AD 741
well, when I bought my AD741 with power drive and silent power at woodworking show in Toronto in Nov 2015, it was about CAD 10K plus tax. Factored into the exchange rate at the time (1 USD = 1.3375 CAD), it was US$ 7476. I noticed the price of AD741 has gone up cause someone mentioned AD741 with power drive and silent power cutterhead was about $9300 last Dec, but AD941 with power drive, silent power drive and comfort guide was 10955 at Felder 60 years anniversary special pricing, so AD941 was absolutely a good deal. Silent power cutterhead is really awesome, and quiet! James On Mon, Jan 30, 2017 at 3:07 PM, Bellsouth dohertyj@... [felder-woodworking] <felder-woodworking@...> wrote:
|
|
Re: AD 741
¿ªÔÆÌåÓýRichard,Does the AD741 have a silent power cutterhead? It like new condition with low use it seems OK. ? I was concerned when you mentioned the AD751 because those are certainly not worth $7400. ?I think Felder discontinues the AD751 in the early 2000s and I think they had some problems. ? Maybe other have a better idea if a newish AD741 is worth $7400. Joe in New Orleans
|
|
Re: AD 741
Hi Joe The jointed/planer is AD 741 not a 751 i guess I pushed the wrong key The owner said its a 2012 of a 2013 it also has the Power drive It appears to be in great shape would 7,400 be a fair price Thanks for your input On Jan 29, 2017 6:10 PM, "Joe dohertyj@... [felder-woodworking]" <felder-woodworking@...> wrote:
|
|
Re: New C3-41 owner
My 1999 C3-31 had two issues. The first was that the massive cam clamp, which turned out to be real overkill for the application, moved up and down on a round post that was also the used by the miter gauge quadrant as it's pivot. The effect of clamping stock with the cam clamp was similar to rapping the miter quadrant with a mallet- it always knocked it a few degrees one way or the other. And because in a threaded connection the first threads take more of the load the force? of the cam levered up against the top forward thread and stripped it, followed by the next thread etc. until the top 6 threads or so were gone on the forward side so the post and miter gauge could rattle around as they liked. ?Far the worst design I've seen, I replaced it with an Osborne EB-3 ? ? For the rip fence I used a NOS Delta unifence, no longer made. An issue is that when you want to thickness plane you start by flipping the rear joiner table up and it supports the fence rail which is cantilevered from the joiner table to the saw blade, so the fence rail is beyond vertical when planing. Whatever system you pick will likely have to be front rail only and wants a stout rail. A discussion of various fence options for the Hammer B3 is here: http://tinyurl.com/zwnfdxz? and? http://tinyurl.com/65y698r And an installation sequence for the unifence on a B3 is here: http://tinyurl.com/hybp2al I like the unifence and it hasn't disappointed me yet. Perhaps this information will get you started and if you need more just ask.
Brian(J) |
|
Re: Adjust shaper spindle to 90 on C3-41
¿ªÔÆÌåÓýDan you should mention type and year of machine martin/campshure/co/llc 608-824-0023?fax Designing and building for 47 years On Jan 30, 2017, at 8:29 AM, mac campshure mac512002@... [felder-woodworking] <felder-woodworking@...> wrote:
|
|
Re: Adjust shaper spindle to 90 on C3-41
¿ªÔÆÌåÓýClean ways and check for dirt on the stop bolt if that fails adjust the bolts best to put a dial indicator on the spindle and sweep 360. Different modeled have different adjustments you will have to figure that out, not rocket science. martin/campshure/co/llc 608-824-0023?fax Designing and building for 47 years On Jan 30, 2017, at 2:34 AM, imranindiana@... [felder-woodworking] <felder-woodworking@...> wrote:
|
|
Re: Adjust shaper spindle to 90 on C3-41
You may clarify if this 90 deg you cannot achieve is in the direction the spindle travels or you are talking about the other direction, that is inline with material feed.
I have a diff Felder machine but achieving 90 in the direction of spindle travel is done by a set screw. If the screw is already bottomed out than you may need a screw with shorter head. You may also have dust preventing the last bit of travel. If you are talking about not achieving 90 in the material feed direction, that is more complicated. I can only hazard a guess that the entire spindle assembly would need to be shimmed against the base machine. I have never looked at this adjustment on my machine, so not sure if it is even possible. |
David P. Best
imran
to navigate to use esc to dismiss