That¡¯s 2¡± per meter, right? ? David Best - via mobile phone?
toggle quoted message
Show quoted text
On May 2, 2024, at 8:21?PM, lance via groups.io <offaces@...> wrote:
?
Typical slope specced for the houses we've built in LA is 2" towards garage doors.
On Thursday, May 2, 2024 at 07:54:38 PM PDT, Bob Frizell <bob.frizell@...> wrote:
Gidday
Associated with this, but not to do with levelling machinery, what is the slope put on such garage floors for drainage?
Expressed as H/L
My son has a problem on a new construct and he is compromised by the entry height to his garage and is wondering if a small slope on the garage floor could assist
Tnx
Bob
|
Typical slope specced for the houses we've built in LA is 2" towards garage doors.
On Thursday, May 2, 2024 at 07:54:38 PM PDT, Bob Frizell <bob.frizell@...> wrote:
Gidday
Associated with this, but not to do with levelling machinery, what is the slope put on such garage floors for drainage?
Expressed as H/L
My son has a problem on a new construct and he is compromised by the entry height to his garage and is wondering if a small slope on the garage floor could assist
Tnx
Bob
|
Gidday
Associated with this, but not to do with levelling machinery, what is the slope put on such garage floors for drainage?
Expressed as H/L
My son has a problem on a new construct and he is compromised by the entry height to his garage and is wondering if a small slope on the garage floor could assist
Tnx
Bob
|
My K3 had leveling feet (or was it part of the mobility kit?)
Anyway I just order some Mcmaster
|
I picked up my slider today from Felder warehouse in Sacramento and dropped of my old K3 slider.
I rented a 12 ft trailer from United rentals.
loading up the K3 was super easy with the mobility kit (As oppose to loading it on U-Haul trailer which was nightmare)
The pallet of the K700 is huge and we rotated the pallet in order to accommodate the 3.2m slider
When I tried to unload it with a pallet jack, the pallet jack was too small and the end of the pallet was still on the ground.?
At that point, even if I got a forklift I wasn¡¯t able to unload the pallet since the trailer wheels blocked the access from the side of the pallet. luckily the machine was oriented in such a way that I was able to build a ramp from the pallet on the trailer directly to the ground.
I was a stressful hour until I was able to securely placed the saw in its place .
PS.
PK, I almost made the trip (120 miles each direction) without stopping to charge. Each direction consumed 54% battery.
I stopped for 10 min charge on my way back and all blocked all the entire EVGo site. The charging stations don¡¯t accommodate vehicles that tow.?
|
No, most folks just sit them directly on the concrete.
Brian Lamb
blamb11@...
www.lambtoolworks.com
toggle quoted message
Show quoted text
On May 2, 2024, at 5:33?PM, netanel.belgazal@... wrote:
The saw doesn¡¯t come with leveling feet?
|
The saw doesn¡¯t come with leveling feet?
|
I was hoping to here about the proper coffee to consume before putting the legs on¡..
Mike
M.E. Blake GC
|
That was my original suggestion, one size shorter on the belt. Vacuum what will come off and then paper towels or rags for the rest.
Brian Lamb
blamb11@...
www.lambtoolworks.com
toggle quoted message
Show quoted text
On May 2, 2024, at 1:32?PM, hagai@... wrote:
So today I opened the machine, as you guys suggested, I tightened the drive belt after opening the 4 screws of the engine, it actually helped a lot and there is a significant reduction in the noise.? But I'm at the limit of adjusting the motor, do you think its possible felder supplied the machine with a belt that is too long?
also, how would you clean the dust from all the area?
thansk
|
So today I opened the machine, as you guys suggested, I tightened the drive belt after opening the 4 screws of the engine, it actually helped a lot and there is a significant reduction in the noise.?
But I'm at the limit of adjusting the motor, do you think its possible felder supplied the machine with a belt that is too long?
also, how would you clean the dust from all the area?
thansk
|
Good one. ?Or how about how to couple a 4¡± flex hose to an 80mm dust port? ? Or 30mm versus 1?-inch shaper spindles. ? ?
David Best
DBestWorkshop@...
https://www.flickr.com/photos/davidpbest/collections/
https://www.youtube.com/@David_Best
toggle quoted message
Show quoted text
On May 2, 2024, at 2:25?PM, Brett Wissel via groups.io <Brettwissel@...> wrote:
To be fair, I was thinking it was time to talk bandsaw blades again to see if anything's changed. HAHAHAHAHA. ;) On Thu, May 2, 2024 at 3:35?PM David Luckensmeyer via <dhluckens= [email protected]> wrote:
Hi David:
That sounds like too much common sense!!! ?
Maybe most of us receive the posted emails into our inboxes and don¡¯t log in? I know I only log in to check for relevant posts before writing a post of my own. So your comment/suggestion is well taken.?
Makes me wonder if members ever search the FOG archives. ? Many of the same questions come up on two year cycles.? Leveling feet is one of the hearty perennials.? Follow this link:?
David Best - via mobile phone?
On May 2, 2024, at 12:59?PM, imranindiana via <imranindiana=[email protected]> wrote:
?I was hoping someone will reply with feet that others have recommended in past. I bought one similar to the ones with glued black cushions on the bottom from McMaster and the cushions slip out from underneath, as already mentioned by John H.
Ones others have shared that seem to work are of following design. Part below is for reference only. You should be able to search leveling feet on the FOG web interface and find the actual recommended part.
On May 2, 2024, at 3:22?PM, Agavewoodwerks via <Agavewoodwerks= [email protected]> wrote:
?Thanks to both of you.? I have ordered what I need for the Felder from McMaster-Carr and I am returning the other feet I had on hand for the different machine.? Easy enough!
-- Brett Wissel Saint Louis Restoration 1831 S Kingshighway Blvd (at Shaw Blvd) St Louis, MO 63110 314.772.2167 brett@...
|
To be fair, I was thinking it was time to talk bandsaw blades again to see if anything's changed. HAHAHAHAHA. ;)
On Thu, May 2, 2024 at 3:35?PM David Luckensmeyer via <dhluckens= [email protected]> wrote:
Hi David:
That sounds like too much common sense!!! ?
Maybe most of us receive the posted emails into our inboxes and don¡¯t log in? I know I only log in to check for relevant posts before writing a post of my own. So your comment/suggestion is well taken.?
Makes me wonder if members ever search the FOG archives. ? Many of the same questions come up on two year cycles.? Leveling feet is one of the hearty perennials.? Follow this link:?
David Best - via mobile phone?
On May 2, 2024, at 12:59?PM, imranindiana via <imranindiana=[email protected]> wrote:
?I was hoping someone will reply with feet that others have recommended in past. I bought one similar to the ones with glued black cushions on the bottom from McMaster and the cushions slip out from underneath, as already mentioned by John H.
Ones others have shared that seem to work are of following design. Part below is for reference only. You should be able to search leveling feet on the FOG web interface and find the actual recommended part.
On May 2, 2024, at 3:22?PM, Agavewoodwerks via <Agavewoodwerks= [email protected]> wrote:
?Thanks to both of you.? I have ordered what I need for the Felder from McMaster-Carr and I am returning the other feet I had on hand for the different machine.? Easy enough!
-- Brett Wissel Saint Louis Restoration 1831 S Kingshighway Blvd (at Shaw Blvd) St Louis, MO 63110 314.772.2167 brett@...
|
Hi David:
That sounds like too much common sense!!! ?
Maybe most of us receive the posted emails into our inboxes and don¡¯t log in? I know I only log in to check for relevant posts before writing a post of my own. So your comment/suggestion is well taken.?
toggle quoted message
Show quoted text
Makes me wonder if members ever search the FOG archives. ? Many of the same questions come up on two year cycles. ?Leveling feet is one of the hearty perennials. ?Follow this link:?
David Best - via mobile phone?
On May 2, 2024, at 12:59?PM, imranindiana via groups.io <imranindiana@...> wrote:
?I was hoping someone will reply with feet that others have recommended in past. I bought one similar to the ones with glued black cushions on the bottom from McMaster and the cushions slip out from underneath, as already mentioned by John H.
Ones others have shared that seem to work are of following design. Part below is for reference only. You should be able to search leveling feet on the FOG web interface and find the actual recommended part.
https://www.mcmaster.com/6992K84
On May 2, 2024, at 3:22?PM, Agavewoodwerks via groups.io <Agavewoodwerks@...> wrote:
?Thanks to both of you. ?I have ordered what I need for the Felder from McMaster-Carr and I am returning the other feet I had on hand for the different machine. ?Easy enough!
|
Makes me wonder if members ever search the FOG archives. ? Many of the same questions come up on two year cycles. ?Leveling feet is one of the hearty perennials. ?Follow this link:?
David Best - via mobile phone?
toggle quoted message
Show quoted text
On May 2, 2024, at 12:59?PM, imranindiana via groups.io <imranindiana@...> wrote:
? I was hoping someone will reply with feet that others have recommended in past. I bought one similar to the ones with glued black cushions on the bottom from McMaster and the cushions slip out from underneath, as already mentioned by John H.
Ones others have shared that seem to work are of following design. Part below is for reference only. You should be able to search leveling feet on the FOG web interface and find the actual recommended part.
https://www.mcmaster.com/6992K84 On May 2, 2024, at 3:22?PM, Agavewoodwerks via groups.io <Agavewoodwerks@...> wrote: ?Thanks to both of you. ?I have ordered what I need for the Felder from McMaster-Carr and I am returning the other feet I had on hand for the different machine. ?Easy enough!
|
|
|
David P. Best
David Luckensmeyer
imran
