Re: AD941 vs. Baileigh JP-1898-NC
I would appreciate that.? I have a spare power feeder I was planning on using with the jointer but other projects came along that I haven't pursued this lately. Thanks, Dave
On Tue, Jul 28, 2020 at 3:35 PM Averman, Ed (FAA) via <Ed.Averman= [email protected]> wrote:
Dave –
?
Well, I could, but due to tight quarters where the machine resides, I removed the bracket so I can push the machine back that extra few inches for additional
“leg room” in my garage. ??
?
If you think it might be useful to you, I can pull the machine out a bit and take a picture of the holes, or maybe with the bracket temporarily/barely installed
to give an idea.?
?
Skip
?
?
?
From: [email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 4:16 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
?
Skip,
? Very interesting.? ?Can you post some pictures?
?
On Tue, Jul 28, 2020 at 3:15 PM Averman, Ed (FAA) via <Ed.Averman=[email protected]> wrote:
My AD 941 came with a PF mounting bracket installed in pre-drilled holes (I ordered it that way).? I think, as David
Best has pointed out, for it to work practically, you need to make a spacer block to get the PF high enough to clear the fence.? I haven’t mounted a PF on mine yet, but what David said is correct.? He made one for his (AD 951 or Dual 51 (not sure which one
he has)), and he has posted pictures, etc.?
?
Skip
?
From:
[email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 4:01 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
?
It will work on the AD951.? But as far as I know not the AD941
?
On Tue, Jul 28, 2020 at 2:56 PM Andy Wojteczko <andy@...> wrote:
Dave you should check with John as to how he knows it will work.
Andy
?
?
Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine.
?
Mark,
? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location.
?
I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width
?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message --------
Date: 2020-07-28 2:35 p.m. (GMT-05:00)
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously...
?
Single phase 4hp i think ?(Whatever is the standard.?
The 3piece guard (which I don’t think they say is standard on the web but they include it)
3p 7.5 hp i think (Whatever is the standard)
Variable speed (which is standard)
?
?
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941.
There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
--
Dave & Marie Davies
318-219-7868
--
Andy Wojteczko
--
Dave & Marie Davies
318-219-7868
--
Dave & Marie Davies
318-219-7868
-- Dave & Marie Davies
318-219-7868
|
Re: Aigner Distometer up alternative?
Oh.... now when on the main page by topics I see that this topic is in 2 parts with the same title. ?
|
Re: Aigner Distometer up alternative?
I wonder if this is a system-forum problem. ?I do not recall seeing this happen before. ?Brian, I also see my original post on this topic when searching by messages, confirming it was not deleted. ? I generally view threads by topic so I can see the original post and follow the replies. ?Strange not seeing my original post when viewing this thread by topic and a number of replies. ?Makes it hard to follow the conversation, and that is especially true for others that may want to offer input as they are missing info. ?
|
Re: AD941 vs. Baileigh JP-1898-NC
Dave –
?
Well, I could, but due to tight quarters where the machine resides, I removed the bracket so I can push the machine back that extra few inches for additional
“leg room” in my garage. ??
?
If you think it might be useful to you, I can pull the machine out a bit and take a picture of the holes, or maybe with the bracket temporarily/barely installed
to give an idea.?
?
Skip
?
?
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 4:16 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
?
Skip,
? Very interesting.? ?Can you post some pictures?
?
On Tue, Jul 28, 2020 at 3:15 PM Averman, Ed (FAA) via <Ed.Averman=[email protected]> wrote:
My AD 941 came with a PF mounting bracket installed in pre-drilled holes (I ordered it that way).? I think, as David
Best has pointed out, for it to work practically, you need to make a spacer block to get the PF high enough to clear the fence.? I haven’t mounted a PF on mine yet, but what David said is correct.? He made one for his (AD 951 or Dual 51 (not sure which one
he has)), and he has posted pictures, etc.?
?
Skip
?
From:
[email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 4:01 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
?
It will work on the AD951.? But as far as I know not the AD941
?
On Tue, Jul 28, 2020 at 2:56 PM Andy Wojteczko <andy@...> wrote:
Dave you should check with John as to how he knows it will work.
Andy
?
?
Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine.
?
Mark,
? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location.
?
I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width
?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message --------
Date: 2020-07-28 2:35 p.m. (GMT-05:00)
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously...
?
Single phase 4hp i think ?(Whatever is the standard.?
The 3piece guard (which I don’t think they say is standard on the web but they include it)
3p 7.5 hp i think (Whatever is the standard)
Variable speed (which is standard)
?
?
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941.
There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
--
Dave & Marie Davies
318-219-7868
--
Andy Wojteczko
--
Dave & Marie Davies
318-219-7868
--
Dave & Marie Davies
318-219-7868
|
Re: AD941 vs. Baileigh JP-1898-NC
David B and others have had to make the spacer to work in conjunction with using the Smart Stand if memory serves me right. Works fine with the standard PF mounting post. Also might need the longer extension tube.
On Tue, Jul 28, 2020 at 4:15 PM Averman, Ed (FAA) via <Ed.Averman= [email protected]> wrote:
My AD 941 came with a PF mounting bracket installed in pre-drilled holes (I ordered it that way).? I think, as David Best has pointed out, for it to work practically, you need
to make a spacer block to get the PF high enough to clear the fence.? I haven’t mounted a PF on mine yet, but what David said is correct.? He made one for his (AD 951 or Dual 51 (not sure which one he has)), and he has posted pictures, etc.?
?
Skip
?
From: [email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 4:01 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
?
It will work on the AD951.? But as far as I know not the AD941
?
On Tue, Jul 28, 2020 at 2:56 PM Andy Wojteczko <andy@...> wrote:
Dave you should check with John as to how he knows it will work.
Andy
?
?
Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine.
?
Mark,
? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location.
?
I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width
?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message --------
Date: 2020-07-28 2:35 p.m. (GMT-05:00)
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously...
?
Single phase 4hp i think ?(Whatever is the standard.?
The 3piece guard (which I don’t think they say is standard on the web but they include it)
3p 7.5 hp i think (Whatever is the standard)
Variable speed (which is standard)
?
?
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941.
There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
--
Dave & Marie Davies
318-219-7868
--
Andy Wojteczko
--
Dave & Marie Davies
318-219-7868
|
Re: AD941 vs. Baileigh JP-1898-NC
Skip, ? Very interesting.? ?Can you post some pictures? Thanks Dave
On Tue, Jul 28, 2020 at 3:15 PM Averman, Ed (FAA) via <Ed.Averman= [email protected]> wrote:
My AD 941 came with a PF mounting bracket installed in pre-drilled holes (I ordered it that way).? I think, as David Best has pointed out, for it to work practically, you need
to make a spacer block to get the PF high enough to clear the fence.? I haven’t mounted a PF on mine yet, but what David said is correct.? He made one for his (AD 951 or Dual 51 (not sure which one he has)), and he has posted pictures, etc.?
?
Skip
?
From: [email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 4:01 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
?
It will work on the AD951.? But as far as I know not the AD941
?
On Tue, Jul 28, 2020 at 2:56 PM Andy Wojteczko <andy@...> wrote:
Dave you should check with John as to how he knows it will work.
Andy
?
?
Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine.
?
Mark,
? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location.
?
I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width
?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message --------
Date: 2020-07-28 2:35 p.m. (GMT-05:00)
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously...
?
Single phase 4hp i think ?(Whatever is the standard.?
The 3piece guard (which I don’t think they say is standard on the web but they include it)
3p 7.5 hp i think (Whatever is the standard)
Variable speed (which is standard)
?
?
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941.
There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
--
Dave & Marie Davies
318-219-7868
--
Andy Wojteczko
--
Dave & Marie Davies
318-219-7868
-- Dave & Marie Davies
318-219-7868
|
Re: AD941 vs. Baileigh JP-1898-NC
My AD 941 came with a PF mounting bracket installed in pre-drilled holes (I ordered it that way).? I think, as David Best has pointed out, for it to work practically, you need
to make a spacer block to get the PF high enough to clear the fence.? I haven’t mounted a PF on mine yet, but what David said is correct.? He made one for his (AD 951 or Dual 51 (not sure which one he has)), and he has posted pictures, etc.?
?
Skip
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 4:01 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
?
It will work on the AD951.? But as far as I know not the AD941
?
On Tue, Jul 28, 2020 at 2:56 PM Andy Wojteczko <andy@...> wrote:
Dave you should check with John as to how he knows it will work.
Andy
?
?
Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine.
?
Mark,
? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location.
?
I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width
?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message --------
Date: 2020-07-28 2:35 p.m. (GMT-05:00)
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously...
?
Single phase 4hp i think ?(Whatever is the standard.?
The 3piece guard (which I don’t think they say is standard on the web but they include it)
3p 7.5 hp i think (Whatever is the standard)
Variable speed (which is standard)
?
?
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941.
There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
--
Dave & Marie Davies
318-219-7868
--
Andy Wojteczko
--
Dave & Marie Davies
318-219-7868
|
Re: AD941 vs. Baileigh JP-1898-NC
You should check with Felder, they will surely know more than us...
toggle quoted message
Show quoted text
On Jul 28, 2020, at 3:56 PM, Andy Wojteczko <andy@...> wrote:
? Dave you should check with John as to how he knows it will work. Andy ? ? Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine.
On Jul 28, 2020, at 3:06 PM, David Davies <myfinishingtouch@...> wrote: ? Mark, ? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location. ? I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width ? Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.? -------- Original message -------- Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... ? Single phase 4hp i think ?(Whatever is the standard.? The 3piece guard (which I don’t think they say is standard on the web but they include it) 3p 7.5 hp i think (Whatever is the standard) Variable speed (which is standard) ?
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote: ?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
-- Dave & Marie Davies
318-219-7868
-- Andy Wojteczko
|
Re: AD941 vs. Baileigh JP-1898-NC
It will work on the AD951.? But as far as I know not the AD941 Dave
On Tue, Jul 28, 2020 at 2:56 PM Andy Wojteczko < andy@...> wrote: Dave you should check with John as to how he knows it will work. Andy ? ? Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine. ? Mark, ? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location. ? I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width ? Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.? -------- Original message -------- Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... ? Single phase 4hp i think ?(Whatever is the standard.? The 3piece guard (which I don’t think they say is standard on the web but they include it) 3p 7.5 hp i think (Whatever is the standard) Variable speed (which is standard) ?
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote: ?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
-- Dave & Marie Davies
318-219-7868
--
Andy Wojteczko
-- Dave & Marie Davies
318-219-7868
|
Re: AD941 vs. Baileigh JP-1898-NC
Dave you should check with John as to how he knows it will work. Andy ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of Mark Kessler
Sent: Tuesday, July 28, 2020 3:12 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC? Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine.
On Jul 28, 2020, at 3:06 PM, David Davies <myfinishingtouch@...> wrote: ? Mark, ? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location. ? I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width ? Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.? -------- Original message -------- Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... ? Single phase 4hp i think ?(Whatever is the standard.? The 3piece guard (which I don’t think they say is standard on the web but they include it) 3p 7.5 hp i think (Whatever is the standard) Variable speed (which is standard) ?
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote: ?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
-- Dave & Marie Davies
318-219-7868
-- Andy Wojteczko
|
Re: Aigner Distometer up alternative?
If you look at the topic, a lot of messages are not there, if you look at messages, they are all there. Not sure why, but no messages have been removed.
toggle quoted message
Show quoted text
Seems like my original post was removed along with the one to follow by Dave Davies and perhaps others. ?Strange. ?
|
Re: AD941 vs. Baileigh JP-1898-NC
Dave, not sure. I would call service to see if it’s possible. Someone told me that I could do it before I bought it and I think even after when I was going to upgrade to the 951 after the 941 debacle.?
Even if you can’t simply drill holes and mount it as the removable cover for the hinge might be in the way (looks like there is enough space to the right of that cover though). Something could easily fab’d up, maybe thats what Felder was telling me, didn’t investigate further than that.?
Let us know what u find out , would be interesting to find out if Felder was blowing smoke...
toggle quoted message
Show quoted text
On Jul 28, 2020, at 3:13 PM, David Davies <myfinishingtouch@...> wrote:
? Mark, ? I couldn't find the mount on their e-shop.? Do you have a part number? Thanks, Dave Davies Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine. ? Mark, ? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location. Dave Davies I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width ?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message -------- Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... AD41 silent cutter? Single phase 4hp i think ?(Whatever is the standard.? Powerdrive The 3piece guard (which I don’t think they say is standard on the web but they include it)
AD951 Silent cutter 3p 7.5 hp i think (Whatever is the standard) Powerdrive Variable speed (which is standard) 3 piece guard On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
-- Dave & Marie Davies
318-219-7868
-- Dave & Marie Davies
318-219-7868
|
Re: AD941 vs. Baileigh JP-1898-NC
I’ve heard of some folks buying stuff related to metal working and it’s all been re-badged Chinese units, quality is suspect to say the least. I haven’t heard that they don’t support you, but then I haven’t paid that much attention. I try to do my best to not spend money in China...
toggle quoted message
Show quoted text
On Jul 28, 2020, at 10:49 AM, Bill Bélanger < Bllblngr@...> wrote:
Thanks for that Brian. It does look quite impressive though. I wonder about the accuracy. My AD941 is spot on for thickness.
Bill Belanger? On Tue, Jul 28, 2020 at 1:43 PM Brian Lamb < blamb11@...> wrote: Chinese imports with the Baileigh name on them. Wouldn’t be my choice at any price.
Hello,
I am about ready to pull the trigger on a AD941.? Then I see that this Baileigh beast is on sale for less than the quote I got for the AD941.? This unit does not require a switch over and has a power drive mech like an AD951.
Thoughts on Baileigh?
Paul
|
Re: AD941 vs. Baileigh JP-1898-NC
Mark, ? I couldn't find the mount on their e-shop.? Do you have a part number? Thanks, Dave Davies
Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine. ? Mark, ? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location. Dave Davies I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width ?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message -------- Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... AD41 silent cutter? Single phase 4hp i think ?(Whatever is the standard.? Powerdrive The 3piece guard (which I don’t think they say is standard on the web but they include it)
AD951 Silent cutter 3p 7.5 hp i think (Whatever is the standard) Powerdrive Variable speed (which is standard) 3 piece guard On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
-- Dave & Marie Davies
318-219-7868
-- Dave & Marie Davies
318-219-7868
|
Re: AD941 vs. Baileigh JP-1898-NC
Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine.
toggle quoted message
Show quoted text
On Jul 28, 2020, at 3:06 PM, David Davies <myfinishingtouch@...> wrote:
? Mark, ? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location. Dave Davies I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width ?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message -------- Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... AD41 silent cutter? Single phase 4hp i think ?(Whatever is the standard.? Powerdrive The 3piece guard (which I don’t think they say is standard on the web but they include it)
AD951 Silent cutter 3p 7.5 hp i think (Whatever is the standard) Powerdrive Variable speed (which is standard) 3 piece guard On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
-- Dave & Marie Davies
318-219-7868
|
Re: AD941 vs. Baileigh JP-1898-NC
Mark, ? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location. Dave Davies
I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width ?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message -------- Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... AD41 silent cutter? Single phase 4hp i think ?(Whatever is the standard.? Powerdrive The 3piece guard (which I don’t think they say is standard on the web but they include it)
AD951 Silent cutter 3p 7.5 hp i think (Whatever is the standard) Powerdrive Variable speed (which is standard) 3 piece guard On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
-- Dave & Marie Davies
318-219-7868
|
Re: AD941 vs. Baileigh JP-1898-NC
My point is you don't have to drill the holes no panels to alter/replace as its designed for the machine.
I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width ?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message -------- Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... AD41 silent cutter? Single phase 4hp i think ?(Whatever is the standard.? Powerdrive The 3piece guard (which I don’t think they say is standard on the web but they include it)
AD951 Silent cutter 3p 7.5 hp i think (Whatever is the standard) Powerdrive Variable speed (which is standard) 3 piece guard On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
|
Re: AD941 vs. Baileigh JP-1898-NC
I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width
toggle quoted message
Show quoted text
On Jul 28, 2020, at 2:45 PM, jmkserv@... wrote:
?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message -------- From: Mark Kessler <mkessler10@...> Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... AD41 silent cutter? Single phase 4hp i think ?(Whatever is the standard.? Powerdrive The 3piece guard (which I don’t think they say is standard on the web but they include it)
AD951 Silent cutter 3p 7.5 hp i think (Whatever is the standard) Powerdrive Variable speed (which is standard) 3 piece guard On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
|
Re: AD941 vs. Baileigh JP-1898-NC
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
toggle quoted message
Show quoted text
-------- Original message -------- From: Mark Kessler <mkessler10@...> Date: 2020-07-28 2:35 p.m. (GMT-05:00) Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... AD41 silent cutter? Single phase 4hp i think ?(Whatever is the standard.? Powerdrive The 3piece guard (which I don’t think they say is standard on the web but they include it)
AD951 Silent cutter 3p 7.5 hp i think (Whatever is the standard) Powerdrive Variable speed (which is standard) 3 piece guard On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
|
Re: AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously... AD41 silent cutter? Single phase 4hp i think ?(Whatever is the standard.? Powerdrive The 3piece guard (which I don’t think they say is standard on the web but they include it)
AD951 Silent cutter 3p 7.5 hp i think (Whatever is the standard) Powerdrive Variable speed (which is standard) 3 piece guard
toggle quoted message
Show quoted text
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941. There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
|
