Re: AD941 vs. Baileigh JP-1898-NC
|
Dave ¨C
?
Well, I could, but due to tight quarters where the machine resides, I removed the bracket so I can push the machine back that extra few inches for additional
¡°leg room¡± in my garage. ??
?
If you think it might be useful to you, I can pull the machine out a bit and take a picture of the holes, or maybe with the bracket temporarily/barely installed
to give an idea.?
?
Skip
?
?
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 4:16 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
?
Skip,
? Very interesting.? ?Can you post some pictures?
?
On Tue, Jul 28, 2020 at 3:15 PM Averman, Ed (FAA) via <Ed.Averman=[email protected]> wrote:
My AD 941 came with a PF mounting bracket installed in pre-drilled holes (I ordered it that way).? I think, as David
Best has pointed out, for it to work practically, you need to make a spacer block to get the PF high enough to clear the fence.? I haven¡¯t mounted a PF on mine yet, but what David said is correct.? He made one for his (AD 951 or Dual 51 (not sure which one
he has)), and he has posted pictures, etc.?
?
Skip
?
From:
[email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 4:01 PM
To: [email protected]
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
?
It will work on the AD951.? But as far as I know not the AD941
?
On Tue, Jul 28, 2020 at 2:56 PM Andy Wojteczko <andy@...> wrote:
Dave you should check with John as to how he knows it will work.
Andy
?
?
Could be, pretty sure Felder told me there was a way to do it because I asked when I bought mine.
?
Mark,
? I'm pretty sure you can't mount it on the AD941.? I have one and there are access panels in that location.
?
I believe i was told that you can mount the same bracket on the ad941, would need to drill the holes. chassis is the same except for the width
?
Another plus with the AD951 is the ability, with the optional mounting bracket to add a Power Feeder.?
-------- Original message --------
Date: 2020-07-28 2:35 p.m. (GMT-05:00)
Subject: Re: [FOG] AD941 vs. Baileigh JP-1898-NC
Sang, I was speaking from experience on AD941 - AD951 about $3500, is true though need to ask to get an accurate quote obviously...
?
Single phase 4hp i think ?(Whatever is the standard.?
The 3piece guard (which I don¡¯t think they say is standard on the web but they include it)
3p 7.5 hp i think (Whatever is the standard)
Variable speed (which is standard)
?
?
On Jul 28, 2020, at 2:27 PM, Sang Luu <sangluu@...> wrote:
?I don't think it's correct to blanket assume you will get 951 standard options that would otherwise be options on the 941.
There are a lot of options on the 951 so I would simply just ask the rep to help guide your decision. They have the pricing structure, which none of us have.?
--
Dave & Marie Davies
318-219-7868
--
Andy Wojteczko
--
Dave & Marie Davies
318-219-7868
--
Dave & Marie Davies
318-219-7868
|
