开云体育

Paul, Try tightening down those feed roller springs just a little more. If it starts to pull you;ve tightened one side too much. The other problem is that the feed belt could be slipping. Have you

Hi folks, I have just signed onto the Felder list serve and have enjoyed seeing the photos and comments by the group. John R. thanks for e-mailing me the 5-sided cut. It was very helpful in setting

Hi Paul, Have you lubricated or waxed the platen recently? I had a similar problem some years ago with my Inca jointer/planer which suddenly just quit feeding. After a whole lot of headscratching

Hi John, I have checked the belt, and it is not slipping. I've taken the springs from no tension to almost max compression- the best I can get is slight movement. I'm sure there is a solution, but I'm

I have the cast iron extension that I've used to mount the fence for surfacing wide boards. You're right, you can do it without the fence, but I like the safety aspect of using the fence. I only

Art - I'll echo your sentiments about the new forum - even I didn't expect it to just jump to life so quickly like this, and I'm one of those "the glass is half full" types. Not sure why your

Thanks to Paul, Seth, and Charlie for input on my "to fence or not to fence" question for wide jointing on the BF6-31. I tried surface planing a 12" wide board today without the fence with excellent

Dave - we're almost neighbors. I'm in Everett, and visited a friend who has a BF6-21 in Seattle today. Hmm... I predict a Northwest F.O.G. BBQ sometime this summer. Your comment regarding Plain Text

I uploaded to the vault a 3 phase wiring diagram and comments showing how I wired my BF6-31, AF-22, FB-540 and time delay relay for turning on the power to the dust collector. Larry Johnson

I've just uploaded some files to the vault. One was an article on installing Air Handling systems metal ductwork. There are a couple of jpgs showing how I wired a single phase quick disconnect and a

What is the address of the vault? Thanks, Paul

Help! I can't view any of the files in the vault that use the " .doc " file extension. I can read all the e-mail, text files and view all the .JPG files but when I double click a file with the .doc

The files are Microsoft Word files.

I have a 3 phase AF-22 and it's very noisy so I definitely wear ear protection every time I turn any of my machines on. Larry J

Is there some way to identify who the author is of news and pictures that are uploaded to the vault? Should there be? Paul

Hi Paul, I wrote and uploaded the newsletter and also put some of the three phase stuff up there as well as the 5 sided cut. I'll have to get back in there and put my John Henry also. This was all

rich, I uploaded those in Word97 format. I'll put them up in txt format when I get back from a trip on Thursday. Take care, John

Group - We're on our way to 40 members! Congratulations! It looks like we're getting off to a great start, but there are a few bumps in the road I need to comment on. 1. Duplicate subscriptions...

John, Is your AF-22 dust collector single phase? I gather it is based on your comments of using a standard X-10 compatible wireless 220v switch. At the other Felder owner's shop in Seattle that I

Thanks to John R. and Seth H.for their responses. After much fussing, adjusting the compression spring screws 1/2 of one screwdriver slot width at a time, and finding the an appropriate balance