开云体育

Hello FOG, I have a brand new AD941, a RL 140 and a Nova Voyager drill press for sale. I am located in Austin, Texas. After a really long wait to get all of them I am moving and will not be able to

Hi Stan, Good to know on the PM2800B. Looking at the exploded parts diagram, it looks like those drill presses use an entirely different mechanism than the 2820EVS, so whatever the issue was on the

Hi Kevin, I assume you are asking me about my write-up of the many I shared. If so, I should be able to confirm, if you share the electrical schematic of your machine with me. You can share it here or

Imran, any idea if this will also work for a K3?

?Hello Netanel, Just wanted to clarify the parts included. The single machine option would include the reversible T-nut with built in leveling set screws? And when sending in the aluminum block

Due to the discussion of some buying a new saw, thought I share few solutions members have come up with for adding wired and wireless control switches. Depending upon the location of control switches

Please add me to the list for one unit. Bill Webb

Please add me to the list for one unit. Thanks! Tim Nelle Eureka, Texas

Thanks for the clarification. Put me down for the two machine kit. Craig

The flip stop is only included if you purchase the two machine kit

Count me in. Will the components also include the new flip stop? Many thanks to you and David both. Craig

B Lam - The metal shop knows the required tolerance of 0.002 between the T nut and the bushing. Bill - I’ll be using the latest design from David. you are right about the components (T-nut with 2

Yes, if it’s complete and doesn’t need modification during install.

Thanks for ?putting this together. ?I saw that David Best's linked album shows a preliminary design and a final design. ?Am I correct in thinking that your kit will be machined per David's final

I can second Netanel on finish from Tersa. It is smooth and in raking light you can see the blade mark lines but not feel them. I go to 180 (unless need lower grit finish) and do a few swipes to

Add me to the list for a t-nut and clamping block fix

David, … why bother with going to the gym when your Felder units provide you with such an opportunity for exercise? ? Thanks for the literature review. A lot of the knowledge of interest is

Yes indeed…put me on the list. Terry

Im in. David mentioned the solution requires precise fitting per machine, I think. Am I getting that correct? And if so what is the solution here?

Count me in as interested also. Brad