开云体育

is there a us distributor that sell Aigner products? I forgot to order the Aigner bracket when I did the order from S&S and paying 80? for shipping is a bit expensive. In addition, I couldn’t find

These two links may or may not help you, but they do illustrate the mechanical system used to attach the Aigner Integral Fence to the shaper hood: https://flic.kr/s/aHsjPw5vLy

I have a 2004 Felder CF731S and I’m hearing from a Felder rep that there’s not a compatible Aigner Integral Fence that would work with my original shaper hood (pictured and linked below).

Definitely just contact Felder for the spare parts. At least here in Canada, i have found them to be very reasonably priced. Definitely cheaper than having something machined up as a one off. Felder's

I have a 10-inch (254mm) Forrest Dado King drilled to fit a KF700 saw arbor (or 30mm shaper spindle) that I’m willing to sell. It was used only once to cut tenons in 10 Douglas Fir fence rails, and

I have a BF 6-41 (single phase) that I purchased used some 25 years ago. It has the scoring arbor that appears to function. It turns when the machine is on, but I've never used it as it is missing the

Kamal, I have the 8” size Forrest’s dado set. Thx, Wade

Brian, My understanding is that you were sent tooling designer for the shaper (spindle), while you were looking for something that could be used on both saw and shaper. An example of what you may be

Hi Brian, I wood call Felder, speak with a manager, ask for a return shipping label and ask for a refund or exchange. I don’t know why they would have southway does not fit the machine. BTW, I have

I also bought a cutter that had pin holes but wouldn’t mount on the pin pattern on the saw arbor. It is part number 4.1.173 and I have other sizes and they don’t fit. What is this cutter meant

Kamal - I tried to use the Felder grooving cutter for some dadoes for 1/4 ply on the C3. Ply being ply, it was about 1/32 thinner.? The Felder cutters did not go that thin. Ended up getting a 6"

Hi Kamal, You may already know this but to be sure 6" dado will give you about 1" depth of cut (depending upon your saw aggregate). May be this is fine for your use case. I did have the older 8" CMT

I have the ridge carbide stack and it works well for the most part. However if you are trying to get any precise measurements dialed in then it can prove to be very annoying with the shims. The

Kamal, I have the Forrest stack for my K700S. Great results for me. Wade

I have the Forrest 8” that I used in my K700S. It worked well the few times I used it. I don’t know how it will work on my K450X, as the pin setup is not present when using the Dado. -- John

Sorry to revive an older thread but about to pull the trigger on dado blades for my K700S.? Looking at the Ridge Carbide 6" Chipper Super Dado @ $350 vs the Felder Adjustable Groover Cutter Set

David: This may be?due to Revenue Recognition guidelines within US Accounting principles. If memory serves, companies were abusing the ‘buy and hold’ practice to manipulate the timing of

I suppose I could potentially do that.? But I'm more inclined to purchase a dust collector that meets my needs out of the box.? Or maybe the phrase in this instance should be "off the pallet".? I

Thanks for that correction…I am far from an expert in fluid mechanics, so was having a difficult time trying to figure out why a larger-sized duct would have a greater static head. I can now return

I keep my big blade on my Oliver 94D cut off saw that’s a 450 Leitz I could run the 500 but I just don’t cut you. 6 inch material that much. Although I have big saw blades I tend to run 315‘s