开云体育

I am quite surprised that the electrical connections are so poorly defined. I sent an email to Felder tech support asking for guidance. Wouldn’t it be wonderful if they responded as quickly as the

I am leaning towards that. It is strange that if I flip the breaker it resets the saw? <mikelis.vindavs@...> wrote:

Hi Paul, Perhaps the microswitch for the blade cover has dust in it and doesn’t always reset when the cover is closed?

I use the Tenryu 300mm blade and glue up off the saw. Kappa 400 Bill Belanger

Hi Paul, I don’t see how a blade change can result in tripping the breaker in the main electrical panel. May be just a coincidence. To start, I would measure the current to determine if you have a

I have the Felder blade and 2.0 riving knife. As for saw marks Felder has a setup guide and it allows for returns of any blades that cause excessive saw marks. Mine is really smooth. Almost zero marks

Hello, I have the Felder branded version. My experience so far has been the same as yours — I love how quiet it is, but it leaves saw marks on almost every cut. It was the first blade I used when I

David:Thank you for the information and the clarity. Last year,?I purchased a?Solberga drill press - 3-phase, Swiss machine, and needed to add several?3-phase?dedicated outlets. Scheduling an

hey guys, Quick question to those who have used the Felder Diamond blade. I recently obtained the AKE diamond SuperSilent 3 Universal from SauterShop.? I believe the Felder diamond blade is just a

My machine came with 4 wire cable. 2 black and 1 grey (besides the ground). Felder tech told me it isn’t guaranteed which cable will be connected to T3. He told me to open the electrical box and

I have three 3-phase Felder machines and they all came with 5 wire cords (no plug) with instructions that clearly stated on two of them that the “neutral leg (blue wire) is for European use only.”

Yesterday I did a blade change from my groove cutter to a saw blade. While the groove cutter was off I vacuumed out the cabinet. When I put the new blade and riving knife back on and closed the

One more suggestion. 3-Phase wiring is typically colored Black, Red, and Blue so you might ask your electrician to use those code-standard color choices, and wire up T1 to Black, T2 to Red, and T3 to

Thank you, David Best. Great info! -- John Hinman Boise ID K700S and A941

The PP will have connection terminals as follows: L1, L2 - these are the inputs to the PP and where you connect the 230VAC supply line from your breaker panel T1, T2, T3 - these are the output of the

Thanks, Imran! Jacques, Christmas will come in September. I am excited about the new saw. Once in a while I make impulse purchases, and this is one of the bigger ones. -- John Hinman Boise ID K700S

John, Apologies for distracting this thread, but I am curious to know how it feels to experiment ? Christmas in Summer ?? ? Congrats on the new equipment - I am sure you will enjoy it. Regards,

Hi John, With PP there is really not a high (voltage) on the manufactured leg as can be expected with Rotary Phase Converters. Even though the PP is super reliable it still does not hurt to avoid

Thanks, guys! I do not yet have the machine, so cannot look at the plug. I will tell the electrician I do not need a neutral. He has a question about a “high leg” that I cannot answer - hopefully

Felder 3-phase machines as sold in the USA do NOT require a neutral. David Best DBestWorkshop@... https://www.flickr.com/photos/davidpbest/collections/ https://www.youtube.com/@David_Best