开云体育

I measured the raised part on the standard cap of 30mm and 1.25” spindles and they are sized for each uniquely. See pics. It makes sense that Dave Rossetti was able to install his Felder 30mm

Didn't Joe have the Profil shaper? If it fits that and the F700 it more than likely will fit mine. I'm still in Dave wrote:

I do not know – the size is a bit different and they were not sending the one for the 30mm. The 1 ? is being built from the spec’s Joe did a few yrs back (great they still had them). Sent:

I thought someone earlier had said that it did work on both spindles. I didn't think to ask but I guess my question would be if it works on the F700 will it also work on the F900? Dave

I have been on the fence on this. Noted that Dave R said that his 30mm Felder quick lock also works on 1.25” spindle. Do we know, what we are ordering would work with both 30mm and 1.25”

Are all of the machines 3 phase?

Add me to it’s for one. Gil Fuqua Nashville

I am retiring and closing my shop. I would like to offer for sale the following Felder equipment: 1. Felder Shaper F700Z with Feeder F34. This will include an extensive inventory of cutters new in

Thanks Imran, I will do a better video next time. very different places, Australia and New Zealand, almost like New England vs Texas, so to speak.

A few pictures of the RM-11 Rail-Master as an FYI. ?I could only find 1 picture online.

Odd, didn’t show in the shaper tooling page, but it does come up with your p/n as a search, so good news, still available. Brian Lamb blamb11@... www.lambtoolworks.com

Brian, I believe you were looking at HS router spindles as they are for after 4/2007. There is 3 speed spindle on eshop that I posted earlier today. Here it is again. Per the description it should

I went to the US Felder shop and they don’t show shaper spindles for pre 2007, which is what you would need. It will have three pulley diameters. The one Shawn is offering should fit. This sucks, I

A USPS flat rate small box is about $8 Dave Davies wrote:

Jay, 50Hz motor has lower RPM compared to 60Hz. I believe that is taken care off by using a different pulley. So that really should not be an issue. I mentioned it because when I looked at my book it

Thank you, Shawn, and i would have to agree. I will take it as a win. And thank you for the offer regarding the spindle. I will see if the good sir Imran comes up with something more regarding my

Hi?Jay,A day where you don’t laugh at yourself is a wasted day, in my opinion. Same thing goes for a day where you don’t learn anything new. You got both for the price of one there, so today is a

Here is the plate from my machine. (Note the nice 400v sticker;)) How do you handle the 60Hz issue? add/remove weight? -jay

When i talked to the local Felder dealer, who i think talked to Felder in Austria, they said all spindles for my machine was discontinued and not available. If this is not the case i will be a happy

Glad it worked out. I am kind of surprised that the spindle is not available for this circa of KF. I believe following (from us_eshop) is the 3 speed spindle for my 2002 machine. It says out of stock