开云体育

Thanks John, I can only imagine how much louder one is with side cutters. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

Imran, it is a 28-tooth flat top blade, 4mm kerf. It does not have the side blades. I bought it only because it was one of only two PCS certified blades I could get in time to commission my saw. It is

Hi Glen: Coming in late here, but a 350mm blade is kind of a unicorn size in my opinion. It is starting to get big enough to need a thicker plate which means you’re having to recalibrate since it

Michael, Flow x pressure = horsepower All 3 have to be considered together.? Sure, big pipe reduces pressure losses but at the same time reduces air speed.? Chunky materials can settle out on longer

…hence the saying: ? silence is in the ear of the beholder ? ? Nice acquisition; have fun!

John, Is it the one with additional cutters in the middle of the plate along with the typical teeth on the perimeter? Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

I have a 400mm rough cut SilentPower blade for my saw, and it is a real screamer - the loudest I have heard! -- John Hinman Boise ID Kappa 450X and A941

350 mm blade cutting height (max) for K 740 s

Your 160mm is 6.3" and if you went 7" it's only .700 bigger. Open the inlet sheet metal of the dust collector to match your pipe. Then you don't have any restriction to worry about... that's if your

Michael, That is a fair point. I could have ventured an answer 20 yrs ago when I was researching but my memory is terrible and don’t recall much of it at this time ? Imran Malik

If you are working with solid wood and are going to cut thick woods, it would be beneficial to get a blade of at least 350 mm. Remember that when you attach a 350 mm blade, it does not go down

Great to get responses from around the world. Amazing how such distance people can share experiences.? I think I got close to what you have Michael, without the power lift/tilt. I also liked the

I'm fairly comfortable making the calculations.? But I don't know of a resource to guestimate the static pressure impact of reducing the ductwork diameter as you enter the collector.? I know of a

martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/ Designing and building for 50

If you wanna make it very economical by tap on branches They attach to the main screw it on or pop rivet. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

Hi Michael, Calculations for dust collector setup are not that complicated. Here is one place I looked at 20 yrs ago and they still have the info: Dust Collection Information airhand.com Imran Malik

I'm in a similar position, shopping for a workshop where the construction won't be done until ~May next year.? At least the Phase Perfect units aren't all that big, so getting a delivery now and

Sounds like no one is using metric sized main ducts, which is sort of what I expected to hear.? I'm a little concerned about going from a 160mm inlet to a 7" duct (~175mm), as I don't know how to

Hello. I have a k 740 s for 1 year and we really have fun with it. Congratulations on a good choice. Especially the sliding table "X Roll" does a very good job. It is a great advantage to be able to

The rumor is true that come the new year Phase Technologies are raising their prices and no they won't let you buy one now for delivery in six months when your shop is completed.? I figured how hard