开云体育

Two 8' long pallet racks along each side and just span across them. You could put in as many cross members as levels you desire. That or Metro style racking and again, span between two units to create

I have experienced my fair share of great lumber buys, and i am not envious of your experience on saturday. I have had days of moving thousands of bdft by hand, and those are not enjoyable days.

On Saturday I was lucky enough to find a shop selling a stack of Walnut, Mahogany and White oak for an amazing price. I jumped at it and rented a 6x12 uhaul trailer. Upon arrival at the shop it was

That crosses over to iso 680 gear oil.... lots of that in quart sizes on Amazon. Here is one by Kluber, which makes excellent stuff, a bit pricey, but....

Called straightoplane and they said agma8 oil. Can only source 5 gallon drums.

Hi Lucky, I'm not following the need to laminate the front edges of the uprights? The sides are solid wood, correct? Are you doing it to cover the slots and make the front surface proud of the shelves

Oliver redesigned the 299 to the square corner casting in the 1960's. It is possible that grease was used rather than oil, even for the cutter bearings. I'll find out. I had a late model 299 but

Amazing. Thank you david! I could not find the info for the life of me. Being a later end of the second generation design (1968 or so), everything has zerk fittings.

Oliver generally used a 68 ISO recirculating oil for bearings. Mobil DTE heavy /medium. I don't remember any gear oil but it has been years since I sold my 299. I contacted a friend who knows all

Hi FOG: By way of update, the aforementioned Leitz blade is phenomenal. It cuts as smoothly as any blade I’ve owned which is saying something for such a large blade with relatively narrow kerf width

DTE24 is not thick either. You might need some 90 weight differential oil if you think the thick oil is correct. Brian Lambblamb11@...

Thanks for the advice. Just drained the oil and it was super thick. Seems the 75w-90 synthetic I got is very thin. I will probably return it and search for dte

Sorry dte 24 cnc-specialty-store.comI use similar in my mills and lathe gear boxes. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell

Probably something like DT 24 martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/

Anyone know what gear oil to use for my 299d oliver planer from the 60’s? Bought some royal purple 75w-90. Lemme know, i do not have a manual and none of the online versions had the info.

Thanks for this it’s a big help ??

What can I say; ingenious! https://www.instagram.com/reel/C9CSt56o5FX/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==? JPC | Besser im Holzhandwerk on Instagram: "Lifting heavy panels ?

Hi, the motor overload relay will either have to be adjusted for the new motor current, or replaced if it doesn’t have enough adjustment range. The good news is that there’s only one overload

Check out the following document. The concepts will applyl, but the actual adjustment points may vary.

Hi, new to the the felder owners group, but sort it out as it’s my last option other than a technician to fix the problem with my planer! The infeed table on my recently acquired AD531 has a