开云体育

I the early days say 1900 up after you learned to sweep floors proper than your next job was running stroke sander tough upper body work out and also required a bit of coordination.

PK, You got the message! It is always fun to spend someone else’s money! ? Warm regards, Lucky ________________________________ Sent: Wednesday, July 5, 2023 4:20:55 AM To:

Well, my edge sander is equally lack lustre compared to your beauty! So we’re just even. ? Warm regards, Lucky ________________________________ Sent: Wednesday, July 5, 2023 12:00:05 AM To:

What about stoke sanders in fine furniture shops there is always one. If you are into sanding with the long belt they provide a nice finish fast and don’t lift the grain In the hands of a skilled

Joel, I am excited to see your shop. The one advantage of the Rehnen is that the dust collection is built into the castings.? I saw it at IWF and the dust seemed well controlled. PK

On OSS, I have a friend with one of these massive edge sanders. ?Wow what a dust cloud maker but he likes being able to have long boards in contact with the sandpaper at once, especially to make a

David, That is a beast!? I like how you slipped in buying the Kundig plus the Wadkin.? Quite the salesman! PK

If you build furniture than one of these fancy edge sanders would be handy BUT if you have high quality machines and the ability to use them than they are wasted space. I have some of these machines

Next time I have to pull the #2800 machine away from the wall for lubrication I will take one. I unfortunately don't have a spot for this beast to utilize both sides at once and the dust collection

That's a beauty Lucky! Our disc sander and spindle sander are very lackluster in comparison. Jason Jason Holtz J. Holtz Furniture www.jholtz.com 3307 Snelling Ave. South Minneapolis, MN 55406 612

Wadkin made some wonderful machines. Here in the US, Kindt Collins Master Sanders were the top of the chain. They didn't make a combo machine though. Oliver made one similar to your Wadkin. I find I

PK I like your list, however I have one to add, Volpato LBK200 https://www.scosarg.com/volpato-lbk-200-3p-sander I have seen a Volpato sander here in a joinery workshop, the sander must be at least

PK: I like your edge sander list! But just in case you are not acquainted with Wadkin spindle sanders, you should buy the Kundig and then complement it with a Wadkin spindle sander like the JY or JTA.

I have three edge sanders on my wish list. I have an HS950.? It is fine at the price point.? The oscillation is minimal. * Houfek HB1000 with all the options, https://www.houfek.com/en/hb-1000 * Got

Damn. That’s badass.

Jason...can we see some video of the locomotive in action?

The each patten on the Ekstrom Carlson is 8" x 54", thickly ribbed cast iron. The previous owner of my machine drilled and tapped a 2"x 1.5" extension on the top side enabling me to run a 10" belt if

Scott...pro tip on the stuck gate...thanks!

Jason u must be a cave . martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330 cell airtightclamps@... airtightclamps.com instagram.com/maccampshure/

It's a contact closure in 'Auto' mode. The whole GRIT Magswitch is inside the Felder. The power to the switch comes from mains on the RL160. Two other control wires run from the switch to two