开云体育

Get Brian's square. A million uses and a very fair price. Dave ________________________________ Sent: Saturday, March 5, 2022 4:04 AM To: [email protected] <[email protected]>

The square I use is 500 x 250mm, and it’s 10mm thick. It’s a precision machinist square made in Poland and very accurate. I like it because it has a thick edge to indicate again - most machinist

That does look much faster and easier than the 5-cut method. I had never seen the 5-cut method used before, but by the time Jason had set both fences he had used up a lot of that piece of melamine!

Hey “dial indicator-packing nut job”, I performed your method, and ………yeah, it worked. It was quick and easy! ? Thx, Wade

Positively stone-aged method. Highly prone to error & non-deterministic, wastes materials, boggles the mind. But given the scant tools provided to Felder technicians, it’s about all they can do.

Steve, you are certainly welcome here! -- John Hinman Boise ID K700S, and expecting an A941 in April 2022

Congrats John! I’ve been using mine, just not as much as I’d like. Too many other things going on right now. And, lumber prices are through the roof. Really I’m putting my shop back together

Mike, my K700S used three large bolts for the overarm saw guard. How many did you get? -- John Hinman Boise ID K700S, and expecting an A941 in April 2022

Wade, he did it right in front of me. Instead of measuring the ends of the last cut piece he simply cut it in two and paced the two ends side by side. He kept at it as long as we could feel a

Hey John, Congratulations! Just curious did the tech do the five cut method and show you the results? Wade

Looks great, now the fun begins! Brian Lamb blamb11@... www.lambtoolworks.com

Congrats, it looks great. Steve Lyde

It is here, assembled and commissioned! I asked my neighbor if he had experience operating a skid-steer. It turned out that he was not only experienced but had a couple to choose from. He picked it

SR Wood is the manufacturer you need. Blinding amount of options. My local distributor is Wood Stock Supply in Rapid City, SD. Give them a call. You'll talk to a real person, and I believe they were

Anthony, If that’s the case, that’s a real bummer! They were great! Wade

Thank you Wade, I have reached out to the seller, it appears they no longer have any store front or stock, but am awaiting a response. Thanks again for the lead. Anthony

Yes!? ?You need not read further than Sang's first reply (but if you did read more, you should the corrections to the other replies? ;-)

Compared to the Martin WWII tank factory, the Felder production facility is breathtakingly modern. But my guess is that Felder's engineering NIH attitudes would drive you bonkers. They have a proven

It's not a bad idea! I visited their factory in Tirol and it was *the best* grown up activity I've done in recent years. Super inspiring to see all their big machines and more interestingly how our

Maybe you should start working for Felder! Looks super cool.. PK