开云体育

Hi Acharya, Although you haven't asked this, but having purchased the KF700S with 9' sliding table and knowing what I now know, I feel I would have been happier with the longer table. Also, removing

Nah, you can get a martini anywhere, but now if we are to get into DB’s wine cellar…

I have attached the bracket drawing that I created. It is based upon the original but uses 3/8" steel plate instead of the 1/2" AL. One I have had installed on KF700 was made with 1/2" AL plate but

Thanks for the reply. The parts list would be helpful.CHSSent from my T-Mobile 4G LTE Device

Wow that’s a lot of big machinery in a tight space. Well done!

I recently ordered a KF700S. I was considering a 2800 slider, ended up with a 3200 slider with 1500 outrigger. I did not explicitly ask about the 1300 outrigger, but I had the impression that it was

hi charles, the drawing for the custom bracket is in files section. the remaining parts are available from mcmaster carr. i can send you the parts list if you are interested. i had some brackets made

hi jeff, i am glad that you got it going. sorry that you had to go thru the swap on the gas spring. imran

Just to close out on this for those who might be interested, I ordered a 125lb gas spring to try in place of the 250lb spring I had been using. It arrived this evening and I just installed it. It

thank you all for the feedback back in June. i needed to use pressure module on K975 few days ago and realized i never acted on the inability to mount aigner pressure module on xroll. i decided to

Thanks David, google popped his business right up. Sent: Monday, November 16, 2020 2:52 PM To: [email protected] Subject: Re: [FOG] Any experience with Boarke wide belt sanders I think Andy

Thanks Eric, Here is the standard announcement I give everyone about the booze cabinet in my shop: https://flic.kr/p/2ao31Uz <https://flic.kr/p/2ao31Uz> David Best

I think Andy from CO is the dealer on that one. When I was looking at WB, I was interested but he sounded a little too sales guy but to be fair, he gave me a reference for Peter Mulberger who does

There is a dual head 37" for sale on woodweb.? Looked it up and the brand is Taiwanese.? The model for sale weights 2330 kgs (not lbs but kgs).

Lucky, yes I had to improvise with what I have, I only do this part time so I cant justify spending $$ on a dedicated industrial complex. the dead zone behind panel saw is really useful for bandsaw, I

hi shawn, look for a PM from me in your inbox or junk folder. imran

Hey Imran,?Do you happen to know where you bought your aftermarket stop switches for your K975? I've ordered them from Felder before for past machines, but if there's a good alternative, I could use

Hi David Best, When SW posted his question I was happy to anticipate riding on his coattails for some good ideas. Your reply has exceeded my hopes. IMHO, you could contribute significantly to the next

For the KF 700S the Felder catalog lists the 1300mm outrigger as standard, while also listing the three lenghts available for the slider. Yet, I have been told that if you get anything other than the

Agree, Like you do not have any of the expensive options aside the 10ft table. Bill